Thanks Gabor for your help on this. The ATMOCOM driver allows you to use WU sensor mapping or the Ambient mapping if you have a Fine Offset or clone weather station ( but not both) so I should be OK.
dailyrainin created a 2 separate hourly unrealistic high rainfall> 200mm just before midnight last night so something went awry there. My other machine recorded no such rain event. I will try the dailyrainindelta as you have suggested. The ATMOCOM hardware device inventor supports a custom weather34 weather template that works pretty good but he does not specialize in anything related to weewx. I may have to contact the developer of the ATMOCOM weewx udp driver (he's on gitHub) if we can't figure things out here. --- -- On Sunday, December 15, 2019 at 1:00:42 AM UTC-5, Gábor Szabados wrote: > > Hi Glenn, > > I would uses the dailyrainin. I had an issue once during a storm, when a > power outage occurred, that the internal unit forgot the yearlyrainin value > and set it back not to 0 but some earlier state of the week/month. I could > work, but if the two packets has different values that can cause different > issues, similar what I have explained before. > > Probably your best solution is to turn off one of your services in the > weather station. (WU or Ambient) Do a run for a short time and see what > happens then when you do the same test. > > Or you can send a mail to the guy who developed ATMOCOM, asking what is > the solution for this problem. It really should interpret only one of the > packets and not both. Probaly WU is the better choice. > > Best Regards, > > Gabor Szabados > > Glenn Szlagowski <gszla...@gmail.com <javascript:>> ezt írta (időpont: > 2019. dec. 15., Vas 4:43): > >> Success! >> Thanks for your help-greatly appreciated! >> >> There are two types of packets..looks like one goes to ambient weather >> and the other one goes to WU. Interestingly only every fourth packet goes >> to ambient. >> >> Note that the ambient packet contains extra fields. >> >> Here are some samples (sans passwords): >> >> Dec 14 21:54:54 glenn weewx[5373]: atmocomudp: MainThread: raw packet: >> ('passkey=xxxxxx&rev=0x2E708&data=/weatherstation/updateweatherstation.php?ID=ITEHKUMM2&PASSWORD=xxxxxx&indoortempf=70.5&tempf=32.0&dewptf=29.7&windchillf=32.0&indoorhumidity=50&humidity=91&windspeedmph=1.3&windgustmph=2.2&winddir=210&absbaromin=28.84&baromin=29.50&rainin=0.00&dailyrainin=0.04&weeklyrainin=1.24&monthlyrainin=1.32&yearlyrainin=38.87&solarradiation=0.00&UV=0&dateutc=2019-12-15%202:54:44&softwaretype=AMBWeatherV4.0.2&action=updateraw&realtime=1&rtfreq=5 >> >> ', ('192.168.1.8', 12000)) >> >> Dec 14 21:55:33 glenn weewx[5373]: atmocomudp: MainThread: raw packet: >> ('passkey=xxxxxx&rev=0x2E708&data=/endpoint?stationtype=AMBWeatherV4.0.2&PASSKEY=xxxxxx&dateutc=2019-12-15+02:55:32&winddir=330&windspeedmph=1.3&windgustmph=2.2&maxdailygust=11.4&tempf=32.0&hourlyrainin=0.00&eventrainin=0.04&dailyrainin=0.04&weeklyrainin=1.24&monthlyrainin=1.32&yearlyrainin=38.87&baromrelin=29.51&baromabsin=28.85&humidity=92&tempinf=70.5&humidityin=50&uv=0&solarradiation=0.00 >> >> ', ('192.168.1.8', 12000)) >> >> If I change the ATMOCOM sensor mapping to dailyrainin, would that work? >> >> --- >> >> >> On Saturday, December 14, 2019 at 7:17:57 PM UTC-5, gjr80 wrote: >>> >>> Glenn, >>> >>> Ok, I see the raw packet issue (should have seen it before actually). >>> Are you up for making a slight change to atmocomudp.py? If so first make a >>> backup copy of /usr/share/weewx/user/atmocomudp.py then open >>> /usr/share/weewx/user/atmocomudp.py in a text editor and change line 283 >>> from: >>> >>> loginf('raw packet: %s' % m) >>> >>> to >>> >>> loginf('raw packet: %s' % (m,)) >>> >>> Save atmocomudp.py, set log_raw_packets = True in weeewx.conf and >>> restart WeeWX. Check your log. >>> >>> Gary >>> >>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/3f3zakgAEOc/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> weewx...@googlegroups.com <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/f9f3fc89-4b12-44fb-aff0-b34f1bb48f88%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/f9f3fc89-4b12-44fb-aff0-b34f1bb48f88%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/096eba32-1817-471c-9e5e-d97c12eab571%40googlegroups.com.