I am very cautious and don't want to goof things up (well, too much) so 
today I make sure the RaspPi4 is running the latest Buster, and updated all 
the Python 3 files and prerequisites that are listed.

In the Update Guide, there is a red-highlighted admonition that one must 
use the same update method that was used for initial installation.  

I do not recall how I did it, so I'm reading to see that one comment Tom 
made to another user implied that if one looked in /etc/weewx for the 
config file it must have been installed via the DEB package and to use

sudo apt-get update
sudo apt-get install weewx

to update.

I did look in /etc/apt/sources.list.d/weewx.list and it is there.

So can I assume then that I used the DEB process to install initially, and I 
can relatively comfortably proceed with using
the sudo commands above are the right ones to do my update?


Thanks for the hand holding.  Dale

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d3a598a5-73bd-4ad1-a046-1a27d35ec4e8%40googlegroups.com.

Reply via email to