After hours of fiddling, it is still not working.

When i change 'station_type' to Simulator, it starts publishing 0 to 
windGuru. So that element is working. https://www.windguru.cz/station/2146

As soon as i change 'station_type' back to SDR it stops publishing.

When i run sudo rtl_433 -M utc -F json from terminal, it works and i see 
the sensor being read. But this same code inside weewx does not seem to be 
performing properly because it obviously doesn't publish.

Before i go ahead and format the SD and start again, can anyone help me 
with the process to completely remove rtl_433 and rtl_sdr so that i can do 
a fresh install. Perhaps something has gone wrong with these 2 elements and 
they are not performing correctly.

BTW, i added  log_unknown_sensors = True and log_unmapped_sensors = True  to 
the [SDR] section of the weewx.conf and this is the output 
- https://www.dropbox.com/s/n2gwwslqcbwchlj/weewx_03.log?dl=0

Thanks,
Sean.


On Sunday, May 17, 2020 at 4:14:30 PM UTC+4, Sean Jahnig wrote:
>
> Hi,
>
> I have a weewx installation running on a RPi and connected to an acurite 5 
> in 1 using SDR. It has been working well for a long time but suddenly now 
> it is offline and i can't figure out why. I hadn't updated the RPi for a 
> long time so i ran apt-get update and apt-get upgrade but no difference. 
> The RPi is online and it can successfully ping google.com so there is 
> internet connectivity.
>
> I have run the below which manually runs the SDR driver and i do get a 
> response from the sensor which proves it is working. The identifier is 0A0A 
> which is correct in the weewx.conf file.
>
> sudo PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/sdr.py 
> --cmd="rtl_433 -M utc -F json -G"
>
> You can see the log here with debug set to 1. 
> https://www.dropbox.com/s/my6xu6wraba9u7c/weewx.log?dl=0
>
> This is the link to the station which is now offline: 
> https://www.windguru.cz/station/2146
>
> When i run sudo service weewx status the below is what i get. It seems 
> like everything is working except for the part where weewx 'generates a 
> report' / 'added a record', that doesn't seem to be happening.
>
> *●* weewx.service - LSB: weewx weather system
>
>    Loaded: loaded (/etc/init.d/weewx; generated)
>
>    Active: *active (running)* since Sun 2020-05-17 15:59:38 +04; 10min ago
>
>      Docs: man:systemd-sysv-generator(8)
>
>   Process: 1784 ExecStart=/etc/init.d/weewx start (code=exited, 
> status=0/SUCCESS)
>
>     Tasks: 9 (limit: 1599)
>
>    Memory: 13.8M
>
>    CGroup: /system.slice/weewx.service
>
>            ├─1802 python2 /usr/share/weewx/weewxd --daemon 
> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf
>
>            ├─1806 sudo rtl_433 -M utc -F json
>
>            └─1813 rtl_433 -M utc -F json
>
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: 
> PWSweather: Posting not enabled.
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: 
> CWOP: Posting not enabled.
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: 
> WOW: Posting not enabled.
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: 
> AWEKAS: Posting not enabled.
>
> May 17 15:59:39 raspberrypi weewxd[1802]: restx: WindGuru: service version 
> is 0.1
>
> May 17 15:59:39 raspberrypi weewxd[1802]: restx: WindGuru: Data will be 
> uploaded for 10002
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO __main__: 
> Starting up weewx version 4.0.0
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.engine: 
> Using binding 'wx_binding' to database 'weewx.sdb'
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.manager: 
> Starting backfill of daily summaries
>
> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.engine: 
> Starting main packet loop.
>
>
> Does anyone have any suggestions?
>
>
> Thanks,
>
> Sean.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/eeaa29fd-e02b-4057-a1d9-b07285ce9245%40googlegroups.com.

Reply via email to