Do you get any useful error messages from the driver if you run weewx from the command line?
This smells like a data error and I don't know if reinstalling is the best path forward. On Sun, May 17, 2020 at 1:06 PM Sean Jahnig <seanocas...@gmail.com> wrote: > After hours of fiddling, it is still not working. > > When i change 'station_type' to Simulator, it starts publishing 0 to > windGuru. So that element is working. https://www.windguru.cz/station/2146 > > As soon as i change 'station_type' back to SDR it stops publishing. > > When i run sudo rtl_433 -M utc -F json from terminal, it works and i see > the sensor being read. But this same code inside weewx does not seem to be > performing properly because it obviously doesn't publish. > > Before i go ahead and format the SD and start again, can anyone help me > with the process to completely remove rtl_433 and rtl_sdr so that i can do > a fresh install. Perhaps something has gone wrong with these 2 elements and > they are not performing correctly. > > BTW, i added log_unknown_sensors = True and log_unmapped_sensors = True to > the [SDR] section of the weewx.conf and this is the output - > https://www.dropbox.com/s/n2gwwslqcbwchlj/weewx_03.log?dl=0 > > Thanks, > Sean. > > > On Sunday, May 17, 2020 at 4:14:30 PM UTC+4, Sean Jahnig wrote: >> >> Hi, >> >> I have a weewx installation running on a RPi and connected to an acurite >> 5 in 1 using SDR. It has been working well for a long time but suddenly now >> it is offline and i can't figure out why. I hadn't updated the RPi for a >> long time so i ran apt-get update and apt-get upgrade but no difference. >> The RPi is online and it can successfully ping google.com so there is >> internet connectivity. >> >> I have run the below which manually runs the SDR driver and i do get a >> response from the sensor which proves it is working. The identifier is 0A0A >> which is correct in the weewx.conf file. >> >> sudo PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/sdr.py >> --cmd="rtl_433 -M utc -F json -G" >> >> You can see the log here with debug set to 1. >> https://www.dropbox.com/s/my6xu6wraba9u7c/weewx.log?dl=0 >> >> This is the link to the station which is now offline: >> https://www.windguru.cz/station/2146 >> >> When i run sudo service weewx status the below is what i get. It seems >> like everything is working except for the part where weewx 'generates a >> report' / 'added a record', that doesn't seem to be happening. >> >> *●* weewx.service - LSB: weewx weather system >> >> Loaded: loaded (/etc/init.d/weewx; generated) >> >> Active: *active (running)* since Sun 2020-05-17 15:59:38 +04; 10min >> ago >> >> Docs: man:systemd-sysv-generator(8) >> >> Process: 1784 ExecStart=/etc/init.d/weewx start (code=exited, >> status=0/SUCCESS) >> >> Tasks: 9 (limit: 1599) >> >> Memory: 13.8M >> >> CGroup: /system.slice/weewx.service >> >> ├─1802 python2 /usr/share/weewx/weewxd --daemon >> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf >> >> ├─1806 sudo rtl_433 -M utc -F json >> >> └─1813 rtl_433 -M utc -F json >> >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: >> PWSweather: Posting not enabled. >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: >> CWOP: Posting not enabled. >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: >> WOW: Posting not enabled. >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.restx: >> AWEKAS: Posting not enabled. >> >> May 17 15:59:39 raspberrypi weewxd[1802]: restx: WindGuru: service >> version is 0.1 >> >> May 17 15:59:39 raspberrypi weewxd[1802]: restx: WindGuru: Data will be >> uploaded for 10002 >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO __main__: >> Starting up weewx version 4.0.0 >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.engine: >> Using binding 'wx_binding' to database 'weewx.sdb' >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO >> weewx.manager: Starting backfill of daily summaries >> >> May 17 15:59:39 raspberrypi python2[1802]: weewx[1802] INFO weewx.engine: >> Starting main packet loop. >> >> >> Does anyone have any suggestions? >> >> >> Thanks, >> >> Sean. >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/eeaa29fd-e02b-4057-a1d9-b07285ce9245%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/eeaa29fd-e02b-4057-a1d9-b07285ce9245%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Peter Quinn (415)794-2264 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAA1SM22c10u9sfZ1F9-RSzDAProRKpVWFJXuJwgMzp8LBKE4aA%40mail.gmail.com.