I don't think there are any errors in the database, the barometer trend is
displayed in my season <https://affolter.familyds.net/wetter/Seasons/>with
a credible value that also matches the value in the index.html from the
weatherboard (as documented in the older answer).
I also attached the file loop-data-xxx.txt, in the upper part you can see
the values generated by loop-data in the lower part my entry in weewx.conf. It
is striking that the values "trend.barometerRate.desc" and
"trend.barometerRate" are missing.
Yesterday at noon I noticed that the value of the
"trend.barometer.formatted", which is now> 300 is exactly at 12h (GTM + 2)
on the expected value. Will watch this today).
jo...@johnkline.com schrieb am Freitag, 17. Juli 2020 um 16:23:27 UTC+2:
>
> As the documentation states, trend.barometer and 10m.windGust are special
> cases.
>
> In this case, where we are talking about trend.barometer, it is alway the
> delta from three hours ago and uses archive records to compute the starting
> reading. Also, it is expressed as a per hour rate. Thus, it would be 1/3
> of the three hour delta. I did it this way because my sole purpose was to
> compute the text description (e.g., rising slowly).
>
> Perhaps you have some bad data in your database? Have you checked that to
> see what the actual delta and per hour delta should be?
>
> In any event, I need to make trend less special. I think I’ll do that
> this weekend. It should honor the $delta.time_delta for the skin and
> report the actual delta, not on a per hour basis. While I’m doing that,
> I’ll make sure my tests around trend.barometer are good enough. If there
> is a bug, I should find it then.
>
>
> On Jul 16, 2020, at 11:07 PM, geni08...@gmail.com <geni08...@gmail.com>
> wrote:
>
> Thank you very much, the script is a good idea.
>
>
>
> There was another question regarding "trend.barometerRate.formatted". At
> the beginning this gave plausible values, from yesterday evening it
> delivers impossible values.
> Is it possible that 2 sources supply data and interfere?
> I tried to keep a momentary status.
>
> Display liveboard
>
> <loopdata1.jpg>
>
>
> index.html
> <loopdata2.jpg>
>
>
> loop-data.txt
>
> <loopdata3.jpg>
>
>
> index.html.tmpl
> <tr>
> <td style="text-align:center;font-family:monospace;font-size:70px">
> <span id="current.barometer">$current.barometer</span> (<span
> id="trend.barometer.formatted">$trend.barometer.formatted</span>)<span> - </span><span
>
> id="current.outHumidity">$current.outHumidity</span>
> </td>
> </tr>
>
>
> jo...@johnkline.com schrieb am Freitag, 17. Juli 2020 um 00:02:36 UTC+2:
>
>> I’m not sure which parts of Bechlertown rely on MQTT and which parts rely
>> on auto refreshing the page. For the former, if the info is available in
>> LoopData, you would need to add an id to the HTML element and then set the
>> contents via javascript in the same way as WeatherBoard does it.
>>
>> Bechlertown appears to be a well supported skin with frequent updates.
>> You do need to worry about taking updates of the skin since you’ll be
>> making modifications. Ideally, you would write a script to add the ids in
>> the right place and add a line to include the javascript.
>>
>> On Jul 16, 2020, at 8:18 AM, geni08...@gmail.com <geni08...@gmail.com>
>> wrote:
>>
>>
>>
>> Hi John, Thank you for your help so far, my next goal is to update the
>> Belchertown template with weewx-loopdata.
>> MQTT needs an infrastructure there ... I find your solution really
>> elegant. Do you have a tip for me where to start?
>>
>>
>> jo...@johnkline.com schrieb am Donnerstag, 16. Juli 2020 um 15:46:28
>> UTC+2:
>>
>>> It looks like you are on a roll!
>>>
>>> I think you are asking why I don’t have the actual values filled in for
>>> windGust in the template.
>>>
>>> The answer for $10m.windGust.max is that the $10m period is only
>>> understood by LoopData. If you put $10m.windGust.max in the template, it
>>> would cause an error. There is probably a way to compute the 10 minute
>>> high gust, but I didn’t bother to figure that out since the value will
>>> appear anyway on the next loop.
>>>
>>> For $day.windGust.max, adding it to the template should work just fine.
>>> It’s not needed. In fact, none of the values are needed since they are
>>> overwritten by the JavaScript.
>>>
>>>
>>>
>>> On Jul 16, 2020, at 5:26 AM, geni08...@gmail.com <geni08...@gmail.com>
>>> wrote:
>>>
>>> Hi John, it could even add winDir and barometer and humidity!
>>>
>>> What I would like to know why is enough for the two windGust values only
>>> the id in index.html.tmpl
>>> https://affolter.familyds.net/wetter/live/
>>>
>>> <loop02.jpg>
>>>
>>>
>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 22:32:15
>>> UTC+2:
>>>
>>>> Thanks for sending those links.
>>>>
>>>> Again, I don’t think it’s necessary to move the file to ram disk. With
>>>> modern SSDs and wear leveling, and especially with a file this size. You
>>>> might want to do some web searches before deciding if its worth the effort.
>>>>
>>>> On Jul 15, 2020, at 1:14 PM, 'hctp...@googlemail.com' via weewx-user <
>>>> weewx...@googlegroups.com> wrote:
>>>>
>>>> John,
>>>>
>>>> so maybe a project for the next days to put the loop-data.tx into ram
>>>> and serve it via apache2.
>>>> The WeatherBoard site:
>>>>
>>>> https://livewetter.hcpeters.de
>>>>
>>>> and my main weather site:
>>>>
>>>> https://wetter.hcpeters.de/
>>>>
>>>> .
>>>> The gauges you see on the main site seems to use Javascript so that's
>>>> why I asked...! :-D
>>>> At the moment I just give a fixed value and render the entire site
>>>> every minute...near realtime... ;-)
>>>>
>>>> But diving into java would be a big task.... not sure I'm ready for
>>>> that....already fighting with Python...! :-D
>>>>
>>>> Regards,
>>>>
>>>> Christian
>>>>
>>>>
>>>>
>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 21:59:47
>>>> UTC+2:
>>>>
>>>>> I do not personally regard it as a problem. Others may have a
>>>>> different opinion.
>>>>>
>>>>> It certainly is not necessary to have it on the SSD, but you would
>>>>> have to configure apache2 (or whatever web server you are using), to be
>>>>> able to serve loop-data.txt.
>>>>>
>>>>> BTW, is your site visible externally? If so, would you send a link?
>>>>>
>>>>> On Jul 15, 2020, at 12:46 PM, 'hctp...@googlemail.com' via weewx-user
>>>>> <weewx...@googlegroups.com> wrote:
>>>>>
>>>>> John,
>>>>>
>>>>>
>>>>> is this a problem to write the loop-data.txt file every 2sec on a SSD
>>>>> regarding durability!?
>>>>> Or would it be better to place it on a ramdisk (tmpfs) like /dev/shm
>>>>> ...
>>>>>
>>>>> Regards,
>>>>>
>>>>> Christian
>>>>>
>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 21:35:27
>>>>> UTC+2:
>>>>>
>>>>>> Great news!
>>>>>>
>>>>>> The purpose of LoopData is to be able to add to any skin, but it does
>>>>>> require knowledge of JavaScript.
>>>>>>
>>>>>> On Jul 15, 2020, at 12:33 PM, John Kline <jo...@johnkline.com> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> tail -f loop-data.txt won’t work because a new file is created on
>>>>>> every loop.
>>>>>>
>>>>>> You can use:
>>>>>> watch cat loop-data.txt
>>>>>>
>>>>>> You screen shots are not of any javascript errors that might be on
>>>>>> the page.
>>>>>>
>>>>>> Would you send me the following file?
>>>>>> /var/www/html/weewx/weatherboard/index.html
>>>>>>
>>>>>> On Jul 15, 2020, at 12:07 PM, 'hctp...@googlemail.com' via
>>>>>> weewx-user <weewx...@googlegroups.com> wrote:
>>>>>>
>>>>>> ok...last post for now...maybe this is the problem, see screenshot...
>>>>>>
>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um
>>>>>> 20:54:42 UTC+2:
>>>>>>
>>>>>>> ...and the error form the browser after changes as screenshot....
>>>>>>>
>>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um
>>>>>>> 20:49:18 UTC+2:
>>>>>>>
>>>>>>>> Ok,
>>>>>>>>
>>>>>>>> cat /var/www/html/weewx/loop-data.txt
>>>>>>>>
>>>>>>>> {"current.dateTime.raw": 1594838795,
>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm",
>>>>>>>> "current.dewpoint": "8,9\u00b0C", "current.outTemp": "16,7\u00b0C",
>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "3,2 km/h",
>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "8,0
>>>>>>>> km/h", "current.windSpeed.raw": 3.218688}
>>>>>>>>
>>>>>>>> (with missing "current.windSpeed.raw")
>>>>>>>>
>>>>>>>> ....
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um
>>>>>>>> 20:39:01 UTC+2:
>>>>>>>>
>>>>>>>>> John,
>>>>>>>>>
>>>>>>>>> strange...maybe I really should delete anything and start from
>>>>>>>>> scratch?
>>>>>>>>>
>>>>>>>>> But before one more try.. I'm sure the loopdata is made, see some
>>>>>>>>> 'cat' of the file:
>>>>>>>>>
>>>>>>>>> *cat /var/www/html/weewx/loop-data.txt {"current.dateTime.raw":
>>>>>>>>> 1594836959, "current.windDir.ordinal_compass": "NW", "day.rain.sum":
>>>>>>>>> "3,0
>>>>>>>>> mm", "current.dewpoint": "8,7\u00b0C", "current.outTemp":
>>>>>>>>> "17,1\u00b0C",
>>>>>>>>> "current.rainRate": "1,2 mm/h", "current.windSpeed": "3,2 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"}*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *cat /var/www/html/weewx/loop-data.txt {"current.dateTime.raw":
>>>>>>>>> 1594836976, "current.windDir.ordinal_compass": "NNW", "day.rain.sum":
>>>>>>>>> "3,0
>>>>>>>>> mm", "current.dewpoint": "8,7\u00b0C", "current.outTemp":
>>>>>>>>> "17,1\u00b0C",
>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "8,0 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"}*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *cat /var/www/html/weewx/loop-data.txt {"current.dateTime.raw":
>>>>>>>>> 1594836979, "current.windDir.ordinal_compass": "NNW", "day.rain.sum":
>>>>>>>>> "3,0
>>>>>>>>> mm", "current.dewpoint": "8,7\u00b0C", "current.outTemp":
>>>>>>>>> "17,1\u00b0C",
>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "6,4 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"}*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> * cat /var/www/html/weewx/loop-data.txt {"current.dateTime.raw":
>>>>>>>>> 1594836981, "current.windDir.ordinal_compass": "NNW", "day.rain.sum":
>>>>>>>>> "3,0
>>>>>>>>> mm", "current.dewpoint": "8,7\u00b0C", "current.outTemp":
>>>>>>>>> "17,1\u00b0C",
>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "6,4 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"} *
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *cat /var/www/html/weewx/loop-data.txt {"current.dateTime.raw":
>>>>>>>>> 1594836985, "current.windDir.ordinal_compass": "NW", "day.rain.sum":
>>>>>>>>> "3,0
>>>>>>>>> mm", "current.dewpoint": "8,7\u00b0C", "current.outTemp":
>>>>>>>>> "17,1\u00b0C",
>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "4,8 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"}# *
>>>>>>>>>
>>>>>>>>> What I think is a little bit strange, a:
>>>>>>>>>
>>>>>>>>> *tail -f /var/www/html/weewx/loop-data.txt *
>>>>>>>>>
>>>>>>>>> doesn't show any changes after two seconds? Is there some
>>>>>>>>> caching....I dont use the rsync.... Anyway...
>>>>>>>>> '
>>>>>>>>> by the way, I sometimes see floats at the time value like
>>>>>>>>> "current.dateTime.raw": 1594837199.0..?
>>>>>>>>>
>>>>>>>>> Yes, I added this
>>>>>>>>>
>>>>>>>>> *report_services = weewx.engine.StdPrint, weewx.engine.StdReport,
>>>>>>>>> user.loopdata.LoopData*
>>>>>>>>>
>>>>>>>>> and if I turn on debug=1 I see the file is written every loop.
>>>>>>>>> a
>>>>>>>>> *cat /var/www/html/weewx/loop-data.txt*:
>>>>>>>>> {"current.dateTime.raw": 1594837649,
>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": "3,0 mm",
>>>>>>>>> "current.dewpoint": "9,0\u00b0C", "current.outTemp": "16,8\u00b0C",
>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "4,8 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "11,3 km/h"}
>>>>>>>>> {"current.dateTime.raw": 1594837577,
>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm",
>>>>>>>>> "current.dewpoint": "9,1\u00b0C", "current.outTemp": "16,9\u00b0C",
>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "6,4 km/h",
>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "11,3 km/h"}
>>>>>>>>>
>>>>>>>>> a* ls -laht /var/www/html/weewx/weatherboard*
>>>>>>>>>
>>>>>>>>> drwxr-xr-x 12 www-data www-data 4,0K Jul 15 20:28 ..
>>>>>>>>> drwxr-xr-x 2 root root 4,0K Jul 15 20:27 .
>>>>>>>>> -rw-r--r-- 1 root root 12K Jul 15 20:27 index.html
>>>>>>>>> -rw-r--r-- 1 root root 1,7K Jul 15 19:41 weatherboard.css
>>>>>>>>> -rw-r--r-- 1 root root 3,5K Jul 15 19:41 favicon.ico
>>>>>>>>>
>>>>>>>>> So I'm not familiar with .js, I hope I opened the right one in my
>>>>>>>>> FF browser. Never did anything with JavaScript! :-O But I got some
>>>>>>>>> errors,
>>>>>>>>> see attached screenshot.
>>>>>>>>> Thanks for your patience!
>>>>>>>>> Maybe something is blocked by Apache2 (I host the site by
>>>>>>>>> myself)....
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Christian
>>>>>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um
>>>>>>>>> 20:12:27 UTC+2:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi Christian,
>>>>>>>>>>
>>>>>>>>>> wee_extension should not have been using python2 if you did a
>>>>>>>>>> python3 install of weewx; but let’s put that aside.
>>>>>>>>>>
>>>>>>>>>> Of course, you should care that WeatherBoard is not updating on
>>>>>>>>>> every loop cycle, that’s the whole point of it.
>>>>>>>>>>
>>>>>>>>>> I might be better if you deleted all you have done manually and
>>>>>>>>>> do a proper install, but let’s try to work with what you have.
>>>>>>>>>>
>>>>>>>>>> Are you sure loop-data.txt is being generated?
>>>>>>>>>>
>>>>>>>>>> If in weewx.conf, under [Engine][[Services]], on the
>>>>>>>>>> report_services line, do you see user.loopdata.LoopData?
>>>>>>>>>>
>>>>>>>>>> Would you send me a copy of /var/www/html/weewx/loop-data.txt?
>>>>>>>>>>
>>>>>>>>>> Would you send me a directory listing of /var/www/html/weewx/
>>>>>>>>>> weatherboard?
>>>>>>>>>>
>>>>>>>>>> Lastly, from your browser, would you bring up the JavaScript
>>>>>>>>>> console and tell me the error(s) you see?
>>>>>>>>>>
>>>>>>>>>> On Jul 15, 2020, at 10:53 AM, 'Christian Peters' via weewx-user <
>>>>>>>>>> weewx...@googlegroups.com> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> John,
>>>>>>>>>>
>>>>>>>>>> I struggeld installing the extension. I got:
>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>> File "/usr/share/weewx/wee_extension", line 13, in <module>
>>>>>>>>>> import weecfg.extension
>>>>>>>>>> File "/usr/share/weewx/weecfg/__init__.py", line 22, in
>>>>>>>>>> <module>
>>>>>>>>>> import configobj
>>>>>>>>>> ImportError: No module named configobj
>>>>>>>>>>
>>>>>>>>>> ..but the module was installed!
>>>>>>>>>> I then figured out that wee_extension uses python2 but not
>>>>>>>>>> python3 so the module was missing in python 2! ;-)
>>>>>>>>>> I treid to gove Python3 a try with weewx this time as I
>>>>>>>>>> reinstalled it!
>>>>>>>>>> I changed in we_extension the first line to
>>>>>>>>>>
>>>>>>>>>> #!/usr/bin/env python3
>>>>>>>>>>
>>>>>>>>>> and it works.
>>>>>>>>>>
>>>>>>>>>> But first I installed the loop-data exxtension by hand...but I
>>>>>>>>>> think all is in the right place as the loop-data.txt is build.
>>>>>>>>>>
>>>>>>>>>> The WeatherBoardReport section in weewx.conf:
>>>>>>>>>>
>>>>>>>>>> [[WeatherBoardReport]]
>>>>>>>>>> HTML_ROOT = /var/www/html/weewx/weatherboard
>>>>>>>>>> enable = true
>>>>>>>>>> skin = WeatherBoard
>>>>>>>>>> [[[Extras]]]
>>>>>>>>>> meta_title = Live-Wetter Langenseifen, Hessen
>>>>>>>>>> Weather at a Glance WeatherBoard™
>>>>>>>>>> title = Live-Wetter Langenseifen Hessen WeatherBoard&
>>>>>>>>>> trade;
>>>>>>>>>> subtitle = Fortlaufend aktualisiert.
>>>>>>>>>> logo = ""
>>>>>>>>>> loop_data_file = ../loop-data.txt
>>>>>>>>>> contact_email = ""
>>>>>>>>>> expiration_time = 4
>>>>>>>>>> page_update_pwd = foobar
>>>>>>>>>> googleAnalyticsId = ""
>>>>>>>>>> analytics_host = ""
>>>>>>>>>> show_purple = False
>>>>>>>>>> [[[Labels]]]
>>>>>>>>>> [[[[Generic]]]]
>>>>>>>>>> air_quality_index = Air Quality Index
>>>>>>>>>> contact = Kontakt
>>>>>>>>>> legend = Legende
>>>>>>>>>> rain_today = Regen heute
>>>>>>>>>> ten_min_max_gust = 10min Boee
>>>>>>>>>> time_of_day = Uhrzeit
>>>>>>>>>> high_gust_today = Booe max.
>>>>>>>>>> [[[Units]]]
>>>>>>>>>> [[[[StringFormats]]]]
>>>>>>>>>> mile_per_hour = %.1f
>>>>>>>>>> degree_C = %.1f
>>>>>>>>>> km_per_hour = %.1f
>>>>>>>>>> degree_F = %.1f
>>>>>>>>>>
>>>>>>>>>> This section I added at the end of weewx.conf by hand:
>>>>>>>>>>
>>>>>>>>>> #
>>>>>>>>>> ====================================================================================
>>>>>>>>>> # Options for extension 'weewx-loopdata'
>>>>>>>>>>
>>>>>>>>>> [LoopData]
>>>>>>>>>> [[FileSpec]]
>>>>>>>>>> loop_data_dir = /var/www/html/weewx
>>>>>>>>>> filename = loop-data.txt
>>>>>>>>>> [[Formatting]]
>>>>>>>>>> target_report = WeatherBoardReport
>>>>>>>>>> [[RsyncSpec]]
>>>>>>>>>> enable = false
>>>>>>>>>> remote_server = foo.bar.com
>>>>>>>>>> remote_user = root
>>>>>>>>>> remote_dir = /var/www/html
>>>>>>>>>> compress = False
>>>>>>>>>> log_success = False
>>>>>>>>>> ssh_options = -o ConnectTimeout=1
>>>>>>>>>> timeout = 1
>>>>>>>>>> skip_if_older_than = 3
>>>>>>>>>> [[Include]]
>>>>>>>>>> fields = current.dateTime.raw, current.windDir.
>>>>>>>>>> ordinal_compass, day.rain.sum, current.dewpoint, current.outTemp,
>>>>>>>>>> current.rainRate, current.windSpeed, day.windGust.max, 10m.
>>>>>>>>>> windGust.max, current.windSpeed
>>>>>>>>>>
>>>>>>>>>> But there is even a skin.conf at /etc/weew/skinWeatherboard/ ...
>>>>>>>>>>
>>>>>>>>>> # Copyright (C)2020 by John A Kline (jo...@johnkline.com)
>>>>>>>>>> # Distributed under the terms of the GNU Public License (GPLv3)
>>>>>>>>>> # See LICENSE for your rights.
>>>>>>>>>>
>>>>>>>>>> [Extras]
>>>>>>>>>> # Fill path of loop data file. If not a full path,
>>>>>>>>>> # it will be interpreted as relative to this skin's
>>>>>>>>>> HTML_ROOT.
>>>>>>>>>> loop_data_file = '../loop-data.txt'
>>>>>>>>>>
>>>>>>>>>> # Refresh rate is the rate at which the report should
>>>>>>>>>> refresh with
>>>>>>>>>> # the latest readings. A good choice is the rate at which
>>>>>>>>>> your
>>>>>>>>>> # weather stations driver is feeing loop data. Expressed in
>>>>>>>>>> units
>>>>>>>>>> # of seconds. Default: 2 seconds.
>>>>>>>>>> refresh_rate = 2
>>>>>>>>>>
>>>>>>>>>> # Fill in a sutiable title/subtitle for the report.
>>>>>>>>>> title = 'my-weather-website.com WeatherBoard™'
>>>>>>>>>> subtitle = 'Updated continuously.'
>>>>>>>>>>
>>>>>>>>>> # If you have a log, specify it here.
>>>>>>>>>> logo = ''
>>>>>>>>>>
>>>>>>>>>> # Fill in contact email to display on the report.
>>>>>>>>>> contact_email = 'weath...@my-weather-website.com'
>>>>>>>>>>
>>>>>>>>>> # Choose your own password. without ?page_update_pwd='xxx'
>>>>>>>>>> # at the end of the URL, auto updating will timeout.
>>>>>>>>>> # Note: This password will be viaible to users looking
>>>>>>>>>> # at page source in their browser.
>>>>>>>>>> page_update_pwd = 'foobar'
>>>>>>>>>>
>>>>>>>>>> # Page expiration time is the number of hours the report
>>>>>>>>>> will request
>>>>>>>>>> # loop data and update. After which, a mouse clice will be
>>>>>>>>>> needed
>>>>>>>>>> # to start refreshing again. Default 4 hours.
>>>>>>>>>> expiration_time = 4
>>>>>>>>>>
>>>>>>>>>> # If you have a google analytics id, uncomment the following
>>>>>>>>>> line
>>>>>>>>>> # and fill in the ID.
>>>>>>>>>> # googleAnalyticsId =
>>>>>>>>>> # If you only want to use the ID on a certain host,
>>>>>>>>>> uncomment the
>>>>>>>>>> # following line and fill in the hostname.
>>>>>>>>>> # analytics_host = www.example.com
>>>>>>>>>>
>>>>>>>>>> # If a PurpleAir sensor is set up and both weewx-purple and
>>>>>>>>>> # purple-proxy are installed, or just weewx-purple is
>>>>>>>>>> installed;
>>>>>>>>>> # change the 'False' below to 'True'.
>>>>>>>>>> # The weewx-purple extension can be found here:
>>>>>>>>>> # https://github.com/chaunceygardiner/weewx-purple
>>>>>>>>>> # The purple-proxy server can be found here:
>>>>>>>>>> # https://github.com/chaunceygardiner/purple-proxy
>>>>>>>>>> # It is preferable to install both weewx-purple and purple
>>>>>>>>>> proxy
>>>>>>>>>> # as the proxy returns averages over the archive period (as
>>>>>>>>>> # opposed to one shot readings).
>>>>>>>>>> show_purple = False
>>>>>>>>>>
>>>>>>>>>> [Labels]
>>>>>>>>>> [[Generic]]
>>>>>>>>>> # Some specialized labels
>>>>>>>>>> air_quality_index = Air Quality Index
>>>>>>>>>> contact = Contact
>>>>>>>>>> legend = Legend
>>>>>>>>>> rain_today = Rain Today
>>>>>>>>>> ten_min_max_gust = 10m Gust
>>>>>>>>>> time_of_day = Time
>>>>>>>>>> high_gust_today = Today's High Gust
>>>>>>>>>>
>>>>>>>>>> [CheetahGenerator]
>>>>>>>>>> encoding = html_entities
>>>>>>>>>> [[ToDate]]
>>>>>>>>>> [[[index]]]
>>>>>>>>>> template = index.html.tmpl
>>>>>>>>>>
>>>>>>>>>> [CopyGenerator]
>>>>>>>>>> copy_once = favicon.ico, weatherboard.css
>>>>>>>>>> copy_always = ,
>>>>>>>>>>
>>>>>>>>>> [Generators]
>>>>>>>>>> generator_list = weewx.cheetahgenerator.CheetahGenerator,
>>>>>>>>>> weewx.reportengine.CopyGenerator
>>>>>>>>>>
>>>>>>>>>> Do I have to care about!?
>>>>>>>>>>
>>>>>>>>>> The WeatherBoard site seems to update with the interval given in
>>>>>>>>>> weewx (here 1min)....but the JS seems not to work?
>>>>>>>>>> It's starnge too that there are some obersavervations missing and
>>>>>>>>>> the time not catched and printed on the WB site...but Temp is
>>>>>>>>>> changein (all
>>>>>>>>>> 1min while refreshing)?
>>>>>>>>>>
>>>>>>>>>> Hope you could figure something out of my setting!?
>>>>>>>>>>
>>>>>>>>>> Thanks in advance!
>>>>>>>>>>
>>>>>>>>>> Christian
>>>>>>>>>>
>>>>>>>>>> Am Mittwoch, 15. Juli 2020 16:11:06 UTC+2 schrieb John Kline:
>>>>>>>>>>>
>>>>>>>>>>> Hi Christian,
>>>>>>>>>>>
>>>>>>>>>>> Please let me know what was tricky about installing loop-data.
>>>>>>>>>>>
>>>>>>>>>>> Since you are getting loop-data, I suspect that the LoopData
>>>>>>>>>>> extension and the WeatherBoard extension don’t agree about where to
>>>>>>>>>>> find
>>>>>>>>>>> the loop-data.txt file.
>>>>>>>>>>>
>>>>>>>>>>> Would you send both the LoopData section and the WeatherBoard
>>>>>>>>>>> section of weewx.conf?
>>>>>>>>>>>
>>>>>>>>>>> Cheers,
>>>>>>>>>>> John
>>>>>>>>>>>
>>>>>>>>>>> On Jul 15, 2020, at 5:16 AM, 'Christian Peters' via weewx-user <
>>>>>>>>>>> weewx...@googlegroups.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> John,
>>>>>>>>>>>
>>>>>>>>>>> I just installed the loop-data extension and the weatherboard
>>>>>>>>>>> skin to give it a try. :-)
>>>>>>>>>>> A really nice extension.
>>>>>>>>>>>
>>>>>>>>>>> It was a bit tricky to install it but I hope loop-data is
>>>>>>>>>>> running. I get this
>>>>>>>>>>> /var/www/html/weewx/loop-data.txt file with this text:
>>>>>>>>>>>
>>>>>>>>>>> {"current.dateTime.raw": 1594814866,
>>>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": "2,6 mm",
>>>>>>>>>>> "current.dewpoint": "11,3\u00b0C", "current.outTemp":
>>>>>>>>>>> "20,3\u00b0C",
>>>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "6,4 km/h",
>>>>>>>>>>> "day.windGust.max": "19,3 km/h", "10m.windGust.max": "11,3 km/h"}
>>>>>>>>>>>
>>>>>>>>>>> It updates every 2 sec, winddir for example changes....so it
>>>>>>>>>>> seems to work I think.
>>>>>>>>>>>
>>>>>>>>>>> What not works it the wartherboard skin.
>>>>>>>>>>>
>>>>>>>>>>> https://livewetter.hcpeters.de
>>>>>>>>>>>
>>>>>>>>>>> It doesn't update (only if I do a manual refresh on the borwser
>>>>>>>>>>> and not every time it really refreshes to the most recent values).
>>>>>>>>>>> and there is something not working as the time field is missing,
>>>>>>>>>>> even 10m.windGust.max and day.windGust.max ... see screenshot.
>>>>>>>>>>>
>>>>>>>>>>> Am I doing something wrong? I got the most recent .zip files
>>>>>>>>>>> from your site (today). But I'm not sure where to tweak the
>>>>>>>>>>> weatherboard
>>>>>>>>>>> skin ( in weewx.conf or in weatherboard/skin/skin.conf ) ?
>>>>>>>>>>>
>>>>>>>>>>> Thanks in advance for any idea or hint!
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Christian
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/adaaa9c1-dbdd-4534-bda8-784875ce2103o%40googlegroups.com
>>>>>>>>>>>
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/adaaa9c1-dbdd-4534-bda8-784875ce2103o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>> <weatherboard.png>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/155cc6a5-2234-44a0-94f2-99f6fbda1057o%40googlegroups.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/155cc6a5-2234-44a0-94f2-99f6fbda1057o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/c28e82d7-4a36-42f2-832c-4eed5cb5438dn%40googlegroups.com
>>>>>>
>>>>>> <https://groups.google.com/d/msgid/weewx-user/c28e82d7-4a36-42f2-832c-4eed5cb5438dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>> <Bildschirmfoto 2020-07-15 um 21.05.54.png>
>>>>>>
>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+...@googlegroups.com.
>>>>>
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/31847230-f79f-4b2d-a74c-e2c167bf1c2dn%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/31847230-f79f-4b2d-a74c-e2c167bf1c2dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx-user+...@googlegroups.com.
>>>>
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/82a39a64-d6b0-4b76-8791-0d1c801c975an%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/82a39a64-d6b0-4b76-8791-0d1c801c975an%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>>
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/a4aa08bf-45d4-45bd-b867-89d280396b3an%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/a4aa08bf-45d4-45bd-b867-89d280396b3an%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>> <loop02.jpg>
>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/222a401c-95a9-4131-a176-be6125ec6af1n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/222a401c-95a9-4131-a176-be6125ec6af1n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/3997a5f9-0144-4982-8db8-36ec802fc706n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/3997a5f9-0144-4982-8db8-36ec802fc706n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
> <loopdata1.jpg>
> <loopdata2.jpg>
> <loopdata3.jpg>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/3fbd6936-afac-4cd9-ad69-ef40bcc61299n%40googlegroups.com.
{"current.dateTime.raw": 1595051617, "current.windDir": "31\u00b0",
"current.windDir.ordinal_compass": "NNE", "current.windchill": "15.4\u00b0C",
"current.windSpeed": "1.6 km/h", "current.windSpeed.raw": 1.609344,
"day.windGust.max": "8.0 km/h", "10m.windGust.max": "6.4 km/h",
"10m.windGust.max.formatted": "6.4", "current.barometer": "1018.6 hPa",
"trend.barometer.formatted": "329.5", "current.rain": "0.0 mm",
"current.rainRate": "0 mm/h", "day.rain.sum": "0.0 mm", "current.appTemp":
"16.0\u00b0C", "current.outTemp": "15.4\u00b0C", "current.inTemp":
"22.8\u00b0C", "current.dewpoint": "12.9\u00b0C", "current.inHumidity": "53%",
"current.outHumidity": "85%"}
[[Include]]
fields = current.dateTime.raw, current.windDir,
current.windDir.ordinal_compass, current.windchill, current.windSpeed,
current.windSpeed.raw, day.windGust.max, 10m.windGust.max,
10m.windGust.max.formatted, trend.barometerRate.desc, current.barometer,
trend.barometerRate, trend.barometer.formatted, current.rain, current.rainRate,
day.rain.sum, current.appTemp, current.outTemp, current.inTemp,
current.dewpoint, current.inHumidity, current.outHumidity
