Give 2.0.b7 a spin. trend has now been generalized (as opposed to only working with barometer). It will also honor the time_span configured for the target report.
If the numbers don’t look right to you, the last 36 records in the archive table would be more helpful than sending screenshots of the value differing from what report generation produces. trend.barometer.desc (i.e, the .desc suffix) is still an oddball. It shouldn’t be part of LoopData. I’m going to remove it, but I need to move the code (to produce the description) to JavasSript (for one of my personal reports, not as part of LoopData). > On Jul 18, 2020, at 6:05 AM, John Kline <j...@johnkline.com> wrote: > > > I’ve already well on my way to replacing this. Trend will work for all > scalar values, not just barometer. The code is done, but I need to add it to > the tests. > >>> On Jul 17, 2020, at 11:17 PM, geni08...@gmail.com <geni0815.0...@gmail.com> >>> wrote: >>> >> I don't think there are any errors in the database, the barometer trend is >> displayed in my season with a credible value that also matches the value in >> the index.html from the weatherboard (as documented in the older answer). >> I also attached the file loop-data-xxx.txt, in the upper part you can see >> the values generated by loop-data in the lower part my entry in weewx.conf. >> It is striking that the values "trend.barometerRate.desc" and >> "trend.barometerRate" are missing. >> Yesterday at noon I noticed that the value of the >> "trend.barometer.formatted", which is now> 300 is exactly at 12h (GTM + 2) >> on the expected value. Will watch this today). >> >> jo...@johnkline.com schrieb am Freitag, 17. Juli 2020 um 16:23:27 UTC+2: >>> >>> As the documentation states, trend.barometer and 10m.windGust are special >>> cases. >>> >>> In this case, where we are talking about trend.barometer, it is alway the >>> delta from three hours ago and uses archive records to compute the starting >>> reading. Also, it is expressed as a per hour rate. Thus, it would be 1/3 >>> of the three hour delta. I did it this way because my sole purpose was to >>> compute the text description (e.g., rising slowly). >>> >>> Perhaps you have some bad data in your database? Have you checked that to >>> see what the actual delta and per hour delta should be? >>> >>> In any event, I need to make trend less special. I think I’ll do that this >>> weekend. It should honor the $delta.time_delta for the skin and report the >>> actual delta, not on a per hour basis. While I’m doing that, I’ll make >>> sure my tests around trend.barometer are good enough. If there is a bug, I >>> should find it then. >>> >>> >>>>> On Jul 16, 2020, at 11:07 PM, geni08...@gmail.com <geni08...@gmail.com> >>>>> wrote: >>>>> >>>> Thank you very much, the script is a good idea. >>> >>>> >>>> >>>> There was another question regarding "trend.barometerRate.formatted". At >>>> the beginning this gave plausible values, from yesterday evening it >>>> delivers impossible values. >>>> Is it possible that 2 sources supply data and interfere? >>>> I tried to keep a momentary status. >>>> >>>> Display liveboard >>> >>>> <loopdata1.jpg> >>>> >>>> >>>> index.html >>>> <loopdata2.jpg> >>>> >>>> >>>> loop-data.txt >>> >>>> <loopdata3.jpg> >>>> >>>> >>>> index.html.tmpl >>>> <tr> >>>> <td style="text-align:center;font-family:monospace;font-size:70px"> >>>> <span id="current.barometer">$current.barometer</span> (<span >>>> id="trend.barometer.formatted">$trend.barometer.formatted</span>)<span> - </span><span >>>> id="current.outHumidity">$current.outHumidity</span> >>>> </td> >>>> </tr> >>>> >>>> >>>> jo...@johnkline.com schrieb am Freitag, 17. Juli 2020 um 00:02:36 UTC+2: >>>>> I’m not sure which parts of Bechlertown rely on MQTT and which parts rely >>>>> on auto refreshing the page. For the former, if the info is available in >>>>> LoopData, you would need to add an id to the HTML element and then set >>>>> the contents via javascript in the same way as WeatherBoard does it. >>>>> >>>>> Bechlertown appears to be a well supported skin with frequent updates. >>>>> You do need to worry about taking updates of the skin since you’ll be >>>>> making modifications. Ideally, you would write a script to add the ids >>>>> in the right place and add a line to include the javascript. >>>>> >>>>>>> On Jul 16, 2020, at 8:18 AM, geni08...@gmail.com <geni08...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>> >>>>> >>>>>> Hi John, Thank you for your help so far, my next goal is to update the >>>>>> Belchertown template with weewx-loopdata. >>>>>> MQTT needs an infrastructure there ... I find your solution really >>>>>> elegant. Do you have a tip for me where to start? >>>>>> >>>>>> >>>>>> jo...@johnkline.com schrieb am Donnerstag, 16. Juli 2020 um 15:46:28 >>>>>> UTC+2: >>>>>>> It looks like you are on a roll! >>>>>>> >>>>>>> I think you are asking why I don’t have the actual values filled in for >>>>>>> windGust in the template. >>>>>>> >>>>>>> The answer for $10m.windGust.max is that the $10m period is only >>>>>>> understood by LoopData. If you put $10m.windGust.max in the template, >>>>>>> it would cause an error. There is probably a way to compute the 10 >>>>>>> minute high gust, but I didn’t bother to figure that out since the >>>>>>> value will appear anyway on the next loop. >>>>>>> >>>>>>> For $day.windGust.max, adding it to the template should work just fine. >>>>>>> It’s not needed. In fact, none of the values are needed since they >>>>>>> are overwritten by the JavaScript. >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> On Jul 16, 2020, at 5:26 AM, geni08...@gmail.com >>>>>>>>> <geni08...@gmail.com> wrote: >>>>>>>>> >>>>>>>> Hi John, it could even add winDir and barometer and humidity! >>>>>>> >>>>>>>> What I would like to know why is enough for the two windGust values >>>>>>>> only the id in index.html.tmpl >>>>>>>> https://affolter.familyds.net/wetter/live/ >>>>>>>> >>>>>>> >>>>>>>> <loop02.jpg> >>>>>>>> >>>>>>>> >>>>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 22:32:15 >>>>>>>> UTC+2: >>>>>>>>> Thanks for sending those links. >>>>>>>>> >>>>>>>>> Again, I don’t think it’s necessary to move the file to ram disk. >>>>>>>>> With modern SSDs and wear leveling, and especially with a file this >>>>>>>>> size. You might want to do some web searches before deciding if its >>>>>>>>> worth the effort. >>>>>>>>> >>>>>>>>>>> On Jul 15, 2020, at 1:14 PM, 'hctp...@googlemail.com' via >>>>>>>>>>> weewx-user <weewx...@googlegroups.com> wrote: >>>>>>>>>>> >>>>>>>>>> John, >>>>>>>>>> >>>>>>>>>> so maybe a project for the next days to put the loop-data.tx into >>>>>>>>>> ram and serve it via apache2. >>>>>>>>>> The WeatherBoard site: >>>>>>>>>> >>>>>>>>>> https://livewetter.hcpeters.de >>>>>>>>>> >>>>>>>>>> and my main weather site: >>>>>>>>>> >>>>>>>>>> https://wetter.hcpeters.de/ >>>>>>>>>> >>>>>>>>>> . >>>>>>>>>> The gauges you see on the main site seems to use Javascript so >>>>>>>>>> that's why I asked...! :-D >>>>>>>>>> At the moment I just give a fixed value and render the entire site >>>>>>>>>> every minute...near realtime... ;-) >>>>>>>>>> >>>>>>>>>> But diving into java would be a big task.... not sure I'm ready for >>>>>>>>>> that....already fighting with Python...! :-D >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Christian >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 21:59:47 >>>>>>>>>> UTC+2: >>>>>>>>>>> I do not personally regard it as a problem. Others may have a >>>>>>>>>>> different opinion. >>>>>>>>>>> >>>>>>>>>>> It certainly is not necessary to have it on the SSD, but you would >>>>>>>>>>> have to configure apache2 (or whatever web server you are using), >>>>>>>>>>> to be able to serve loop-data.txt. >>>>>>>>>>> >>>>>>>>>>> BTW, is your site visible externally? If so, would you send a link? >>>>>>>>>>> >>>>>>>>>>>>> On Jul 15, 2020, at 12:46 PM, 'hctp...@googlemail.com' via >>>>>>>>>>>>> weewx-user <weewx...@googlegroups.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>> John, >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> is this a problem to write the loop-data.txt file every 2sec on a >>>>>>>>>>>> SSD regarding durability!? >>>>>>>>>>>> Or would it be better to place it on a ramdisk (tmpfs) like >>>>>>>>>>>> /dev/shm ... >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Christian >>>>>>>>>>>> >>>>>>>>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um 21:35:27 >>>>>>>>>>>> UTC+2: >>>>>>>>>>>>> Great news! >>>>>>>>>>>>> >>>>>>>>>>>>> The purpose of LoopData is to be able to add to any skin, but it >>>>>>>>>>>>> does require knowledge of JavaScript. >>>>>>>>>>>>> >>>>>>>>>>>>>>> On Jul 15, 2020, at 12:33 PM, John Kline <jo...@johnkline.com> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> tail -f loop-data.txt won’t work because a new file is created >>>>>>>>>>>>>> on every loop. >>>>>>>>>>>>>> >>>>>>>>>>>>>> You can use: >>>>>>>>>>>>>> watch cat loop-data.txt >>>>>>>>>>>>>> >>>>>>>>>>>>>> You screen shots are not of any javascript errors that might be >>>>>>>>>>>>>> on the page. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Would you send me the following file? >>>>>>>>>>>>>> /var/www/html/weewx/weatherboard/index.html >>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Jul 15, 2020, at 12:07 PM, 'hctp...@googlemail.com' via >>>>>>>>>>>>>>>> weewx-user <weewx...@googlegroups.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ok...last post for now...maybe this is the problem, see >>>>>>>>>>>>>>> screenshot... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um >>>>>>>>>>>>>>> 20:54:42 UTC+2: >>>>>>>>>>>>>>>> ...and the error form the browser after changes as >>>>>>>>>>>>>>>> screenshot.... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um >>>>>>>>>>>>>>>> 20:49:18 UTC+2: >>>>>>>>>>>>>>>>> Ok, >>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594838795, >>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 >>>>>>>>>>>>>>>>> mm", "current.dewpoint": "8,9\u00b0C", "current.outTemp": >>>>>>>>>>>>>>>>> "16,7\u00b0C", "current.rainRate": "0,0 mm/h", >>>>>>>>>>>>>>>>> "current.windSpeed": "3,2 km/h", "day.windGust.max": "27,4 >>>>>>>>>>>>>>>>> km/h", "10m.windGust.max": "8,0 km/h", >>>>>>>>>>>>>>>>> "current.windSpeed.raw": 3.218688} >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> (with missing "current.windSpeed.raw") >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> .... >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> hctp...@googlemail.com schrieb am Mittwoch, 15. Juli 2020 um >>>>>>>>>>>>>>>>> 20:39:01 UTC+2: >>>>>>>>>>>>>>>>>> John, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> strange...maybe I really should delete anything and start >>>>>>>>>>>>>>>>>> from scratch? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> But before one more try.. I'm sure the loopdata is made, see >>>>>>>>>>>>>>>>>> some 'cat' of the file: >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594836959, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "8,7\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "17,1\u00b0C", "current.rainRate": "1,2 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "3,2 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594836976, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "8,7\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "17,1\u00b0C", "current.rainRate": "1,0 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "8,0 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594836979, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "8,7\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "17,1\u00b0C", "current.rainRate": "1,0 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "6,4 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594836981, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "8,7\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "17,1\u00b0C", "current.rainRate": "1,0 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "6,4 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594836985, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "8,7\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "17,1\u00b0C", "current.rainRate": "1,0 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "4,8 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "14,5 km/h"}# >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> What I think is a little bit strange, a: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> tail -f /var/www/html/weewx/loop-data.txt >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> doesn't show any changes after two seconds? Is there some >>>>>>>>>>>>>>>>>> caching....I dont use the rsync.... Anyway... >>>>>>>>>>>>>>>>>> ' >>>>>>>>>>>>>>>>>> by the way, I sometimes see floats at the time value like >>>>>>>>>>>>>>>>>> "current.dateTime.raw": 1594837199.0..? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Yes, I added this >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> report_services = weewx.engine.StdPrint, >>>>>>>>>>>>>>>>>> weewx.engine.StdReport, user.loopdata.LoopData >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> and if I turn on debug=1 I see the file is written every >>>>>>>>>>>>>>>>>> loop. >>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt: >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594837649, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": "3,0 >>>>>>>>>>>>>>>>>> mm", "current.dewpoint": "9,0\u00b0C", "current.outTemp": >>>>>>>>>>>>>>>>>> "16,8\u00b0C", "current.rainRate": "0,0 mm/h", >>>>>>>>>>>>>>>>>> "current.windSpeed": "4,8 km/h", "day.windGust.max": "27,4 >>>>>>>>>>>>>>>>>> km/h", "10m.windGust.max": "11,3 km/h"} >>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594837577, >>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": >>>>>>>>>>>>>>>>>> "3,0 mm", "current.dewpoint": "9,1\u00b0C", >>>>>>>>>>>>>>>>>> "current.outTemp": "16,9\u00b0C", "current.rainRate": "0,0 >>>>>>>>>>>>>>>>>> mm/h", "current.windSpeed": "6,4 km/h", "day.windGust.max": >>>>>>>>>>>>>>>>>> "27,4 km/h", "10m.windGust.max": "11,3 km/h"} >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> a ls -laht /var/www/html/weewx/weatherboard >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> drwxr-xr-x 12 www-data www-data 4,0K Jul 15 20:28 .. >>>>>>>>>>>>>>>>>> drwxr-xr-x 2 root root 4,0K Jul 15 20:27 . >>>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 12K Jul 15 20:27 index.html >>>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 1,7K Jul 15 19:41 >>>>>>>>>>>>>>>>>> weatherboard.css >>>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 3,5K Jul 15 19:41 favicon.ico >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> So I'm not familiar with .js, I hope I opened the right one >>>>>>>>>>>>>>>>>> in my FF browser. Never did anything with JavaScript! :-O >>>>>>>>>>>>>>>>>> But I got some errors, see attached screenshot. >>>>>>>>>>>>>>>>>> Thanks for your patience! >>>>>>>>>>>>>>>>>> Maybe something is blocked by Apache2 (I host the site by >>>>>>>>>>>>>>>>>> myself).... >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Christian >>>>>>>>>>>>>>>>>> jo...@johnkline.com schrieb am Mittwoch, 15. Juli 2020 um >>>>>>>>>>>>>>>>>> 20:12:27 UTC+2: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Christian, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> wee_extension should not have been using python2 if you did >>>>>>>>>>>>>>>>>>> a python3 install of weewx; but let’s put that aside. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Of course, you should care that WeatherBoard is not >>>>>>>>>>>>>>>>>>> updating on every loop cycle, that’s the whole point of it. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I might be better if you deleted all you have done manually >>>>>>>>>>>>>>>>>>> and do a proper install, but let’s try to work with what >>>>>>>>>>>>>>>>>>> you have. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Are you sure loop-data.txt is being generated? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> If in weewx.conf, under [Engine][[Services]], on the >>>>>>>>>>>>>>>>>>> report_services line, do you see user.loopdata.LoopData? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Would you send me a copy of >>>>>>>>>>>>>>>>>>> /var/www/html/weewx/loop-data.txt? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Would you send me a directory listing of >>>>>>>>>>>>>>>>>>> /var/www/html/weewx/weatherboard? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Lastly, from your browser, would you bring up the >>>>>>>>>>>>>>>>>>> JavaScript console and tell me the error(s) you see? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Jul 15, 2020, at 10:53 AM, 'Christian Peters' via >>>>>>>>>>>>>>>>>>>>> weewx-user <weewx...@googlegroups.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> John, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I struggeld installing the extension. I got: >>>>>>>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>>>>>>> File "/usr/share/weewx/wee_extension", line 13, in >>>>>>>>>>>>>>>>>>>> <module> >>>>>>>>>>>>>>>>>>>> import weecfg.extension >>>>>>>>>>>>>>>>>>>> File "/usr/share/weewx/weecfg/__init__.py", line 22, in >>>>>>>>>>>>>>>>>>>> <module> >>>>>>>>>>>>>>>>>>>> import configobj >>>>>>>>>>>>>>>>>>>> ImportError: No module named configobj >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> ..but the module was installed! >>>>>>>>>>>>>>>>>>>> I then figured out that wee_extension uses python2 but not >>>>>>>>>>>>>>>>>>>> python3 so the module was missing in python 2! ;-) >>>>>>>>>>>>>>>>>>>> I treid to gove Python3 a try with weewx this time as I >>>>>>>>>>>>>>>>>>>> reinstalled it! >>>>>>>>>>>>>>>>>>>> I changed in we_extension the first line to >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> #!/usr/bin/env python3 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> and it works. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> But first I installed the loop-data exxtension by >>>>>>>>>>>>>>>>>>>> hand...but I think all is in the right place as the >>>>>>>>>>>>>>>>>>>> loop-data.txt is build. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The WeatherBoardReport section in weewx.conf: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [[WeatherBoardReport]] >>>>>>>>>>>>>>>>>>>> HTML_ROOT = /var/www/html/weewx/weatherboard >>>>>>>>>>>>>>>>>>>> enable = true >>>>>>>>>>>>>>>>>>>> skin = WeatherBoard >>>>>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>>>>> meta_title = Live-Wetter Langenseifen, Hessen >>>>>>>>>>>>>>>>>>>> Weather at a Glance WeatherBoard™ >>>>>>>>>>>>>>>>>>>> title = Live-Wetter Langenseifen Hessen >>>>>>>>>>>>>>>>>>>> WeatherBoard™ >>>>>>>>>>>>>>>>>>>> subtitle = Fortlaufend aktualisiert. >>>>>>>>>>>>>>>>>>>> logo = "" >>>>>>>>>>>>>>>>>>>> loop_data_file = ../loop-data.txt >>>>>>>>>>>>>>>>>>>> contact_email = "" >>>>>>>>>>>>>>>>>>>> expiration_time = 4 >>>>>>>>>>>>>>>>>>>> page_update_pwd = foobar >>>>>>>>>>>>>>>>>>>> googleAnalyticsId = "" >>>>>>>>>>>>>>>>>>>> analytics_host = "" >>>>>>>>>>>>>>>>>>>> show_purple = False >>>>>>>>>>>>>>>>>>>> [[[Labels]]] >>>>>>>>>>>>>>>>>>>> [[[[Generic]]]] >>>>>>>>>>>>>>>>>>>> air_quality_index = Air Quality Index >>>>>>>>>>>>>>>>>>>> contact = Kontakt >>>>>>>>>>>>>>>>>>>> legend = Legende >>>>>>>>>>>>>>>>>>>> rain_today = Regen heute >>>>>>>>>>>>>>>>>>>> ten_min_max_gust = 10min Boee >>>>>>>>>>>>>>>>>>>> time_of_day = Uhrzeit >>>>>>>>>>>>>>>>>>>> high_gust_today = Booe max. >>>>>>>>>>>>>>>>>>>> [[[Units]]] >>>>>>>>>>>>>>>>>>>> [[[[StringFormats]]]] >>>>>>>>>>>>>>>>>>>> mile_per_hour = %.1f >>>>>>>>>>>>>>>>>>>> degree_C = %.1f >>>>>>>>>>>>>>>>>>>> km_per_hour = %.1f >>>>>>>>>>>>>>>>>>>> degree_F = %.1f >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> This section I added at the end of weewx.conf by hand: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # >>>>>>>>>>>>>>>>>>>> ==================================================================================== >>>>>>>>>>>>>>>>>>>> # Options for extension 'weewx-loopdata' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [LoopData] >>>>>>>>>>>>>>>>>>>> [[FileSpec]] >>>>>>>>>>>>>>>>>>>> loop_data_dir = /var/www/html/weewx >>>>>>>>>>>>>>>>>>>> filename = loop-data.txt >>>>>>>>>>>>>>>>>>>> [[Formatting]] >>>>>>>>>>>>>>>>>>>> target_report = WeatherBoardReport >>>>>>>>>>>>>>>>>>>> [[RsyncSpec]] >>>>>>>>>>>>>>>>>>>> enable = false >>>>>>>>>>>>>>>>>>>> remote_server = foo.bar.com >>>>>>>>>>>>>>>>>>>> remote_user = root >>>>>>>>>>>>>>>>>>>> remote_dir = /var/www/html >>>>>>>>>>>>>>>>>>>> compress = False >>>>>>>>>>>>>>>>>>>> log_success = False >>>>>>>>>>>>>>>>>>>> ssh_options = -o ConnectTimeout=1 >>>>>>>>>>>>>>>>>>>> timeout = 1 >>>>>>>>>>>>>>>>>>>> skip_if_older_than = 3 >>>>>>>>>>>>>>>>>>>> [[Include]] >>>>>>>>>>>>>>>>>>>> fields = current.dateTime.raw, >>>>>>>>>>>>>>>>>>>> current.windDir.ordinal_compass, day.rain.sum, >>>>>>>>>>>>>>>>>>>> current.dewpoint, current.outTemp, current.rainRate, >>>>>>>>>>>>>>>>>>>> current.windSpeed, day.windGust.max, 10m.windGust.max, >>>>>>>>>>>>>>>>>>>> current.windSpeed >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> But there is even a skin.conf at >>>>>>>>>>>>>>>>>>>> /etc/weew/skinWeatherboard/ ... >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Copyright (C)2020 by John A Kline (jo...@johnkline.com) >>>>>>>>>>>>>>>>>>>> # Distributed under the terms of the GNU Public License >>>>>>>>>>>>>>>>>>>> (GPLv3) >>>>>>>>>>>>>>>>>>>> # See LICENSE for your rights. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [Extras] >>>>>>>>>>>>>>>>>>>> # Fill path of loop data file. If not a full path, >>>>>>>>>>>>>>>>>>>> # it will be interpreted as relative to this skin's >>>>>>>>>>>>>>>>>>>> HTML_ROOT. >>>>>>>>>>>>>>>>>>>> loop_data_file = '../loop-data.txt' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Refresh rate is the rate at which the report should >>>>>>>>>>>>>>>>>>>> refresh with >>>>>>>>>>>>>>>>>>>> # the latest readings. A good choice is the rate at >>>>>>>>>>>>>>>>>>>> which your >>>>>>>>>>>>>>>>>>>> # weather stations driver is feeing loop data. >>>>>>>>>>>>>>>>>>>> Expressed in units >>>>>>>>>>>>>>>>>>>> # of seconds. Default: 2 seconds. >>>>>>>>>>>>>>>>>>>> refresh_rate = 2 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Fill in a sutiable title/subtitle for the report. >>>>>>>>>>>>>>>>>>>> title = 'my-weather-website.com WeatherBoard™' >>>>>>>>>>>>>>>>>>>> subtitle = 'Updated continuously.' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # If you have a log, specify it here. >>>>>>>>>>>>>>>>>>>> logo = '' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Fill in contact email to display on the report. >>>>>>>>>>>>>>>>>>>> contact_email = 'weath...@my-weather-website.com' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Choose your own password. without >>>>>>>>>>>>>>>>>>>> ?page_update_pwd='xxx' >>>>>>>>>>>>>>>>>>>> # at the end of the URL, auto updating will timeout. >>>>>>>>>>>>>>>>>>>> # Note: This password will be viaible to users looking >>>>>>>>>>>>>>>>>>>> # at page source in their browser. >>>>>>>>>>>>>>>>>>>> page_update_pwd = 'foobar' >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # Page expiration time is the number of hours the >>>>>>>>>>>>>>>>>>>> report will request >>>>>>>>>>>>>>>>>>>> # loop data and update. After which, a mouse clice >>>>>>>>>>>>>>>>>>>> will be needed >>>>>>>>>>>>>>>>>>>> # to start refreshing again. Default 4 hours. >>>>>>>>>>>>>>>>>>>> expiration_time = 4 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # If you have a google analytics id, uncomment the >>>>>>>>>>>>>>>>>>>> following line >>>>>>>>>>>>>>>>>>>> # and fill in the ID. >>>>>>>>>>>>>>>>>>>> # googleAnalyticsId = >>>>>>>>>>>>>>>>>>>> # If you only want to use the ID on a certain host, >>>>>>>>>>>>>>>>>>>> uncomment the >>>>>>>>>>>>>>>>>>>> # following line and fill in the hostname. >>>>>>>>>>>>>>>>>>>> # analytics_host = www.example.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> # If a PurpleAir sensor is set up and both >>>>>>>>>>>>>>>>>>>> weewx-purple and >>>>>>>>>>>>>>>>>>>> # purple-proxy are installed, or just weewx-purple is >>>>>>>>>>>>>>>>>>>> installed; >>>>>>>>>>>>>>>>>>>> # change the 'False' below to 'True'. >>>>>>>>>>>>>>>>>>>> # The weewx-purple extension can be found here: >>>>>>>>>>>>>>>>>>>> # https://github.com/chaunceygardiner/weewx-purple >>>>>>>>>>>>>>>>>>>> # The purple-proxy server can be found here: >>>>>>>>>>>>>>>>>>>> # https://github.com/chaunceygardiner/purple-proxy >>>>>>>>>>>>>>>>>>>> # It is preferable to install both weewx-purple and >>>>>>>>>>>>>>>>>>>> purple proxy >>>>>>>>>>>>>>>>>>>> # as the proxy returns averages over the archive >>>>>>>>>>>>>>>>>>>> period (as >>>>>>>>>>>>>>>>>>>> # opposed to one shot readings). >>>>>>>>>>>>>>>>>>>> show_purple = False >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [Labels] >>>>>>>>>>>>>>>>>>>> [[Generic]] >>>>>>>>>>>>>>>>>>>> # Some specialized labels >>>>>>>>>>>>>>>>>>>> air_quality_index = Air Quality Index >>>>>>>>>>>>>>>>>>>> contact = Contact >>>>>>>>>>>>>>>>>>>> legend = Legend >>>>>>>>>>>>>>>>>>>> rain_today = Rain Today >>>>>>>>>>>>>>>>>>>> ten_min_max_gust = 10m Gust >>>>>>>>>>>>>>>>>>>> time_of_day = Time >>>>>>>>>>>>>>>>>>>> high_gust_today = Today's High Gust >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [CheetahGenerator] >>>>>>>>>>>>>>>>>>>> encoding = html_entities >>>>>>>>>>>>>>>>>>>> [[ToDate]] >>>>>>>>>>>>>>>>>>>> [[[index]]] >>>>>>>>>>>>>>>>>>>> template = index.html.tmpl >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [CopyGenerator] >>>>>>>>>>>>>>>>>>>> copy_once = favicon.ico, weatherboard.css >>>>>>>>>>>>>>>>>>>> copy_always = , >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [Generators] >>>>>>>>>>>>>>>>>>>> generator_list = >>>>>>>>>>>>>>>>>>>> weewx.cheetahgenerator.CheetahGenerator, >>>>>>>>>>>>>>>>>>>> weewx.reportengine.CopyGenerator >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Do I have to care about!? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The WeatherBoard site seems to update with the interval >>>>>>>>>>>>>>>>>>>> given in weewx (here 1min)....but the JS seems not to work? >>>>>>>>>>>>>>>>>>>> It's starnge too that there are some obersavervations >>>>>>>>>>>>>>>>>>>> missing and the time not catched and printed on the WB >>>>>>>>>>>>>>>>>>>> site...but Temp is changein (all 1min while refreshing)? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hope you could figure something out of my setting!? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks in advance! >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Christian >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Am Mittwoch, 15. Juli 2020 16:11:06 UTC+2 schrieb John >>>>>>>>>>>>>>>>>>>> Kline: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Christian, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Please let me know what was tricky about installing >>>>>>>>>>>>>>>>>>>>> loop-data. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Since you are getting loop-data, I suspect that the >>>>>>>>>>>>>>>>>>>>> LoopData extension and the WeatherBoard extension don’t >>>>>>>>>>>>>>>>>>>>> agree about where to find the loop-data.txt file. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Would you send both the LoopData section and the >>>>>>>>>>>>>>>>>>>>> WeatherBoard section of weewx.conf? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>>>>>>> John >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Jul 15, 2020, at 5:16 AM, 'Christian Peters' via >>>>>>>>>>>>>>>>>>>>>>> weewx-user <weewx...@googlegroups.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> John, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I just installed the loop-data extension and the >>>>>>>>>>>>>>>>>>>>>> weatherboard skin to give it a try. :-) >>>>>>>>>>>>>>>>>>>>>> A really nice extension. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It was a bit tricky to install it but I hope loop-data >>>>>>>>>>>>>>>>>>>>>> is running. I get this >>>>>>>>>>>>>>>>>>>>>> /var/www/html/weewx/loop-data.txt file with this text: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> {"current.dateTime.raw": 1594814866, >>>>>>>>>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": >>>>>>>>>>>>>>>>>>>>>> "2,6 mm", "current.dewpoint": "11,3\u00b0C", >>>>>>>>>>>>>>>>>>>>>> "current.outTemp": "20,3\u00b0C", "current.rainRate": >>>>>>>>>>>>>>>>>>>>>> "0,0 mm/h", "current.windSpeed": "6,4 km/h", >>>>>>>>>>>>>>>>>>>>>> "day.windGust.max": "19,3 km/h", "10m.windGust.max": >>>>>>>>>>>>>>>>>>>>>> "11,3 km/h"} >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It updates every 2 sec, winddir for example >>>>>>>>>>>>>>>>>>>>>> changes....so it seems to work I think. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> What not works it the wartherboard skin. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> https://livewetter.hcpeters.de >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> It doesn't update (only if I do a manual refresh on the >>>>>>>>>>>>>>>>>>>>>> borwser and not every time it really refreshes to the >>>>>>>>>>>>>>>>>>>>>> most recent values). >>>>>>>>>>>>>>>>>>>>>> and there is something not working as the time field is >>>>>>>>>>>>>>>>>>>>>> missing, even 10m.windGust.max and day.windGust.max ... >>>>>>>>>>>>>>>>>>>>>> see screenshot. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Am I doing something wrong? I got the most recent .zip >>>>>>>>>>>>>>>>>>>>>> files from your site (today). But I'm not sure where to >>>>>>>>>>>>>>>>>>>>>> tweak the weatherboard skin ( in weewx.conf or in >>>>>>>>>>>>>>>>>>>>>> weatherboard/skin/skin.conf ) ? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks in advance for any idea or hint! >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Christian >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>>>> from it, send an email to weewx...@googlegroups.com. >>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/adaaa9c1-dbdd-4534-bda8-784875ce2103o%40googlegroups.com. >>>>>>>>>>>>>>>>>>>>>> <weatherboard.png> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/155cc6a5-2234-44a0-94f2-99f6fbda1057o%40googlegroups.com. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/c28e82d7-4a36-42f2-832c-4eed5cb5438dn%40googlegroups.com. >>>>>>>>>>>>>>> <Bildschirmfoto 2020-07-15 um 21.05.54.png> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>>> Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/31847230-f79f-4b2d-a74c-e2c167bf1c2dn%40googlegroups.com. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>> Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/82a39a64-d6b0-4b76-8791-0d1c801c975an%40googlegroups.com. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/a4aa08bf-45d4-45bd-b867-89d280396b3an%40googlegroups.com. >>>>>>>> <loop02.jpg> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/222a401c-95a9-4131-a176-be6125ec6af1n%40googlegroups.com. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to weewx-user+...@googlegroups.com. >>> >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/3997a5f9-0144-4982-8db8-36ec802fc706n%40googlegroups.com. >>>> <loopdata1.jpg> >>>> <loopdata2.jpg> >>>> <loopdata3.jpg> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/3fbd6936-afac-4cd9-ad69-ef40bcc61299n%40googlegroups.com. >> <loop-data - xxx.txt> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1B7612F1-5248-4D1A-8997-44A6D80CBDFE%40johnkline.com.
