Regarding Evowitt Battery Status. There are new Sensors like the WH 57 which report the battery status from 0-5 (5=fully charged), but former sensors like the 7in1 with 0 or 1 (1=empty, to be replaced asap). There was a useful threat in the wxforum.net telleing which sensors show which kind of level, but can‘t find it back currently...
Am Dienstag, 28. Juli 2020 18:04:55 UTC+2 schrieb Paul Anderson: > > Gary > First just a note that I was running v0.1.0b6 as a service and my GW1000 > lost it's WIFI connection. Actual dropped WIFI connecting by the GW1000. > Looking at the log I see that the driver worked perfectly, it logged a > connection failure after 3 attempts, but weewx itself kept running so that > only the supplemental data from the GW1000 was lost. Once I relocated the > GW1000 to a better location , without restarting WeeWX, the GW1000 data > started flowing again. Perfect just the behavior I would want. > > Just updated to v0.1.0b7 here is what is returned for battery status: > wh31_ch2_batt: 0, wh31_ch4_batt: 0, wh31_ch5_batt: 0, wh31_ch7_batt: 0, > wh57_batt: 5 > So all sensors recognized, not sure of the meaning of "0" and "5" and why > wh57 returns "5" All sensors installed with new batteries 3 days ago . > > On Tue, Jul 28, 2020 at 9:52 AM gjr80 <gjrod...@gmail.com <javascript:>> > wrote: > >> I have released v0.1.0b7 on Github >> <https://github.com/gjr80/weewx-gw1000/releases>. b7 adds the battery >> states to the default field map which should see battery states appear in >> the loop packets. I expect there will still be some naming issues, >> especially with WH65 and WH32. b7 also fixes a n issue where wind direction >> was wrongly decoded.. >> >> Those that have already installed the driver can download and install >> v0.1.0b7 using the following commands depending on your WeeWX install type: >> >> for setup.py installs: >> >> $ sudo mv /home/weewx/bin/user/gw1000.py /home/weewx/bin/user/gw1000_orig >> .py >> $ sudo wget -P /home/weewx/bin/user https:// >> raw.githubusercontent.com/gjr80/weewx-gw1000/v0.1.0b7/bin/user/gw1000.py >> <http://raw.githubusercontent.com/gjr80/weewx-gw1000/v0.1.0b6/bin/user/gw1000.py> >> >> for package installs: >> >> $ sudo mv /usr/share/weewx/user/gw1000.py /usr/share/weewx/user/ >> gw1000_orig.py >> $ sudo wget -P /usr/share/weewx/user https:// >> raw.githubusercontent.com/gjr80/weewx-gw1000/v0.1.0b7/bin/user/gw1000.py >> <http://raw.githubusercontent.com/gjr80/weewx-gw1000/v0.1.0b6/bin/user/gw1000.py> >> >> There has been no change to the [GW1000] structure so you can just >> restart WeeWX/run v0.1.0b7 directly without further changes. >> >> Gary >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx...@googlegroups.com <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/4636d1ee-f397-4679-907c-45981a165199o%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/4636d1ee-f397-4679-907c-45981a165199o%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3d61d7d9-8ba1-4095-9d05-0d3101afba33o%40googlegroups.com.
