Thanks for clarify. Enrico Il giorno martedì 26 gennaio 2021 alle 00:00:57 UTC+1 tke...@gmail.com ha scritto:
> The parameter rtfeq has a very arcane use. It determines how often the > embedded Flash widget gets updated. It has nothing to do with the weather > station. So, changing its value will not have any affect on how often your > WU page gets updated. > > For more information, see this post: > https://github.com/weewx/weewx/issues/128#issuecomment-225394020 > > The WU Rapidfire update happens as often as your station emits a LOOP > packet. For that, see the section on the WS23XX > <http://www.weewx.com/docs/hardware.htm#ws23xx_notes> in the Hardware > Guide. Unfortunately, they are all hardwired in your station and cannot be > changed. > > -tk > > On Mon, Jan 25, 2021 at 1:54 PM Enrico Re Cecconi <rec...@gmail.com> > wrote: > >> Hi... >> Can anyone help me ? >> Thanks >> >> Il giorno lunedì 4 gennaio 2021 alle 22:49:06 UTC+1 Enrico Re Cecconi ha >> scritto: >> >>> >>> Dears, >>> I'm a new user from Italy and very grateful for this beautiful software, >>> i'ts a few days that I'm connected my weather station to weather >>> underground website. >>> Currently I'm trying to modify some parameter to improve and customize >>> the result. >>> >>> My set-up is: >>> A meteo station Lacrosse 2350 (old model but new because never used) >>> Raspberry pi 3B+ >>> Raspian Lite >>> connection between PWS and Raspberry is made through cable, >>> connection between Raspberry and internet is made through cable (yes, I >>> hate Wi-Fi and wireless if possible...) >>> >>> All works perfectly, till now, I just want to speed up the refresh >>> frequency in WU page, that currently is 5'. >>> I tried to set the parameter rapidfire = true >>> and it seems it works, with a refresh of about 30''. >>> I don't want a so fast refresh, my idea is a time between 60 to 120'', >>> so I tried to set the parameter >>> rtfreq = 60 >>> but without any effect, the time period doesn't increases and frequency >>> stays faster than my target. >>> >>> My question are: >>> 1) I'm wrong if I think rtfreq is the proper parameter ? >>> 2) Why it's not present in the configuration file even if is mentioned >>> in the help ? >>> 3) What can I do or any suggestion to reach the desired target. >>> >>> Here below a section of weewx.conf (now again = false). >>> Thank you all very much for your help. >>> Ciao >>> Enrico >>> >>> # Set the following to True to have weewx use the WU "Rapidfire" >>> # protocol. Not all hardware can support it. See the User's >>> Guide. >>> rapidfire = false >>> # rtfreq = 60 PARAMETRO AGGIUNTO DA ME >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/5419539c-9e28-4fdd-a387-0ebccf9c2a01n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/5419539c-9e28-4fdd-a387-0ebccf9c2a01n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7e8263b6-4da1-4166-acb8-cf3dbd8070edn%40googlegroups.com.
