hello, thank you for this information about schema and UDP.
i use a mikrotik rb4011igs, so i think this should be possible, i will look for a solution and post it here. regards, chris mbat...@gmail.com schrieb am Sonntag, 21. Februar 2021 um 03:39:09 UTC+1: > UDP broadcasts are not routed between subnets, so unless your weewx host > has a presence on the weatherlink hub's net, it won't "hear" the hub. > > There are a couple of ways (besides "multi-homing" the weewx box) to deal > with the problem. Ass u me ing your home firewall / router is a Linux box, > and that you have administrative control of it, one solution is to install > a UDP replicator (such as this one > <https://github.com/thomseddon/udp-replicator>) on your home router. > Another method (same assumptions) is to use port forwarding, which is > described here > <https://www.digitalocean.com/community/tutorials/how-to-forward-ports-through-a-linux-gateway-with-iptables> > . > > On Saturday, February 20, 2021 at 12:55:10 PM UTC-6 michael.s...@gmail.com > wrote: > >> should the pi and weatherlink live be on the same subnetwork, because i >>> dont get data >>> >> >> Yes, to receive the live 2.5 second push updates (wind, rain) both >> devices must be on the same subnet. They work using UDP broadcasts. The >> "complete" data set (HTTP) doesn't technically require it, though I haven't >> tested whether the driver works fine if it never receives a push update (it >> should). >> >> >> why should i switch to WLL schema, i loose specific data, when i dont do >>> it? >>> >> >> The following columns are added in the WLL schema: >> >> - dewpoint and heatindex for up to 9 sensors (default only for 2) >> - wetbulb temperature >> - THW and THSW index ("feels like" temperature) >> - indoor heatindex >> - "rainCount": how often your rain sensor's spoon got tripped since >> the last update >> - "rainCountRate": the current rate of spoon tripping >> - "rainSize": the size of the rain sensor spoon *in inches *(as >> configured in the WLL app or the WeatherLink.com website) >> >> Additionally, daily summaries and units are configured for all new >> columns (except the last one). >> >> >> regards, Michael >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e67d9997-1aa3-42bb-8206-37e69b5cc0cfn%40googlegroups.com.