So go ahead and restart it now. On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote:
> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop > [ ok ] Stopping weewx (via systemctl): weewx.service. > pi@WeatherPi:~ $ sudo killall screen > screen: no process found > pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 > lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs > Output information may be incomplete. > pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen > pi 3809 11222 0 10:01 pts/1 00:00:00 grep --color=auto -e > weewxd -e screen > pi@WeatherPi:~ $ > > On Thursday, 25 February 2021 at 21:57:53 UTC+13 graha...@gmail.com wrote: > >> vnc makes no relevant difference. >> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ user process >> open on /dev/ttyUSB0 at the moment. not weewxd. probably left over from >> earlier troubleshooting. >> kill it with “sudo killall screen”. >> check if any weewxd’s or screen’s hanging around with “ps -ef | grep -e >> weewxd -e screen”. kill them if you find any. >> you should now be back to a clean state with /devttyUSB0 ready for >> opening. do “sudo lsof /dev/ttyUSB0” to be sure >> >> On 25 Feb 2021, at 5:24 pm, gjr80 <gjrod...@gmail.com> wrote: >> >> I don't know, I'm a SSH only person, I am getting out of my depth now. >> >> Gary >> >> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote: >> >>> I am using VNC Viewer (and always have) rather than SSH....not sure if >>> that makes any difference? >>> >>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 wrote: >>> >>>> Hmm, different to my Davis on my RPi which shows weewxd rather than >>>> screen. I will have to defer to Tom or someone who knows about screen. >>>> >>>> Gary >>>> >>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul wrote: >>>> >>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>> /run/user/1000/gvfs >>>>> Output information may be incomplete. >>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 /dev/ttyUSB0 >>>>> pi@WeatherPi:~ $ >>>>> >>>>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4888737c-3a87-47f9-a50c-83dce3313108n%40googlegroups.com.
