You can try reseating the logger. On Sat, Feb 27, 2021 at 5:16 PM monmul <dunbro...@gmail.com> wrote:
> Neither TEST nor NVER returns anything....so, I guess I have a > connectivity problem....which seems strange as I did a straight swap out > of the Envoys! > > On Sunday, 28 February 2021 at 13:33:34 UTC+13 tke...@gmail.com wrote: > >> If the cursor went down the screen, then the console is sending something >> back. Make sure you press <enter> a few times, then "TEST", all in capital >> letters. >> >> You can also type "NVER". Again, all in capital letters. This will return >> the firmware version number. >> >> If neither of those work, then you have a connectivity problem. >> >> >> On Sat, Feb 27, 2021 at 3:54 PM monmul <dunb...@gmail.com> wrote: >> >>> The screen shows blank when I get to the point above.....after hitting >>> enter a few times, it just sends the cursor down the screen......I tried >>> typing TEST but no response...just a dark screen in the CL window. >>> >>> >>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>> >>>> That’s a better start, did you hit enter a few times and then send TEST >>>> as per the wiki article >>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>> You should get a response from the Envoy. >>>> >>>> Gary >>>> >>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>> >>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>> pi@WeatherPi:~ $ sudo killall screen >>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>> /run/user/1000/gvfs >>>>> Output information may be incomplete. >>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>> >>>>> >>>>> Welcome to minicom 2.7 >>>>> >>>>> OPTIONS: I18n >>>>> Compiled on Apr 22 2017, 09:14:19. >>>>> Port /dev/ttyUSB0, 11:00:42 >>>>> >>>>> Press CTRL-A Z for help on special keys >>>>> >>>>> >>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> Monmul, we have not definitively heard whether or not you are able to >>>>>> do the test listed under *Establishing connectivity >>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>> in >>>>>> the Wiki.That is an essential first step. >>>>>> >>>>>> Use either screen or minicom. You may have to preface the command >>>>>> with 'sudo'. For example, >>>>>> >>>>>> >>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>> >>>>>> -tk >>>>>> >>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <dunb...@gmail.com> wrote: >>>>>> >>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx weather >>>>>>> system... >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Initializing >>>>>>> weewx version 4.4.0 >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using Python >>>>>>> 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Platform >>>>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale is >>>>>>> 'en_NZ.UTF-8' >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID file is >>>>>>> /var/run/weewx.pid >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx weather >>>>>>> system: weewx. >>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx weather >>>>>>> system. >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug is 1 >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: Initializing >>>>>>> engine >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: Loading >>>>>>> station type Vantage (weewx.drivers.vantage) >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Driver version is 3.2.1 >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Option loop_request=1 >>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00 >>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Retry #0 failed >>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Retry #1 failed >>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Retry #2 failed >>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>> Retry #3 failed >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.drivers.vantage: >>>>>>> Unable to wake up console >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: Import of >>>>>>> driver failed: Unable to wake up Vantage console (<class >>>>>>> 'weewx.WakeupError'>) >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** Traceback (most recent call last): >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 119, in >>>>>>> setupStation >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** self.console = loader_function(config_dict, self) >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 39, in >>>>>>> loader >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** return VantageService(engine, config_dict) >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1898, in >>>>>>> __init__ >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** Vantage.__init__(self, **config_dict[DRIVER_NAME]) >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 515, in >>>>>>> __init__ >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** self._setup() >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1317, in >>>>>>> _setup >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** self.port.wakeup_console(max_tries=self.max_tries) >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, in >>>>>>> wakeup_console >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** raise weewx.WakeupError("Unable to wake up Vantage console") >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>> **** WakeupError: Unable to wake up Vantage console >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: Unable to >>>>>>> load driver: Unable to wake up Vantage console >>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: **** >>>>>>> Exiting... >>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>> lease >>>>>>> >>>>>>> >>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>> >>>>>>>> So go ahead and restart it now. >>>>>>>> >>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote: >>>>>>>> >>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>> screen: no process found >>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>> /run/user/1000/gvfs >>>>>>>>> Output information may be incomplete. >>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep --color=auto >>>>>>>>> -e weewxd -e screen >>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>> >>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>> graha...@gmail.com wrote: >>>>>>>>> >>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ user >>>>>>>>>> process open on /dev/ttyUSB0 at the moment. not weewxd. probably >>>>>>>>>> left over >>>>>>>>>> from earlier troubleshooting. >>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps -ef | >>>>>>>>>> grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>> you should now be back to a clean state with /devttyUSB0 ready >>>>>>>>>> for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>> >>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <gjrod...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of my depth >>>>>>>>>> now. >>>>>>>>>> >>>>>>>>>> Gary >>>>>>>>>> >>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote: >>>>>>>>>> >>>>>>>>>>> I am using VNC Viewer (and always have) rather than SSH....not >>>>>>>>>>> sure if that makes any difference? >>>>>>>>>>> >>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 wrote: >>>>>>>>>>> >>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd rather >>>>>>>>>>>> than screen. I will have to defer to Tom or someone who knows >>>>>>>>>>>> about screen. >>>>>>>>>>>> >>>>>>>>>>>> Gary >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul wrote: >>>>>>>>>>>> >>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEAUOFnWJV5KExHzsYxscjUcc3WiCoknaHznk0X8RmA-Ww%40mail.gmail.com.