Sorry, I don't quite understand what you mean by "reseat"? On Sunday, 28 February 2021 at 14:40:11 UTC+13 tke...@gmail.com wrote:
> You can try reseating the logger. > > On Sat, Feb 27, 2021 at 5:16 PM monmul <dunb...@gmail.com> wrote: > >> Neither TEST nor NVER returns anything....so, I guess I have a >> connectivity problem....which seems strange as I did a straight swap out >> of the Envoys! >> >> On Sunday, 28 February 2021 at 13:33:34 UTC+13 tke...@gmail.com wrote: >> >>> If the cursor went down the screen, then the console is sending >>> something back. Make sure you press <enter> a few times, then "TEST", all >>> in capital letters. >>> >>> You can also type "NVER". Again, all in capital letters. This will >>> return the firmware version number. >>> >>> If neither of those work, then you have a connectivity problem. >>> >>> >>> On Sat, Feb 27, 2021 at 3:54 PM monmul <dunb...@gmail.com> wrote: >>> >>>> The screen shows blank when I get to the point above.....after hitting >>>> enter a few times, it just sends the cursor down the screen......I tried >>>> typing TEST but no response...just a dark screen in the CL window. >>>> >>>> >>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>> >>>>> That’s a better start, did you hit enter a few times and then send >>>>> TEST as per the wiki article >>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>> >>>>> You should get a response from the Envoy. >>>>> >>>>> Gary >>>>> >>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>> >>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>> /run/user/1000/gvfs >>>>>> Output information may be incomplete. >>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>> >>>>>> >>>>>> Welcome to minicom 2.7 >>>>>> >>>>>> OPTIONS: I18n >>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>> >>>>>> Press CTRL-A Z for help on special keys >>>>>> >>>>>> >>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 tke...@gmail.com >>>>>> wrote: >>>>>> >>>>>>> Monmul, we have not definitively heard whether or not you are able >>>>>>> to do the test listed under *Establishing connectivity >>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>> in >>>>>>> the Wiki.That is an essential first step. >>>>>>> >>>>>>> Use either screen or minicom. You may have to preface the command >>>>>>> with 'sudo'. For example, >>>>>>> >>>>>>> >>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>> >>>>>>> -tk >>>>>>> >>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <dunb...@gmail.com> wrote: >>>>>>> >>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx weather >>>>>>>> system... >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Initializing >>>>>>>> weewx version 4.4.0 >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using Python >>>>>>>> 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Platform >>>>>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale is >>>>>>>> 'en_NZ.UTF-8' >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID file is >>>>>>>> /var/run/weewx.pid >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx weather >>>>>>>> system: weewx. >>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx weather >>>>>>>> system. >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug is 1 >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: Initializing >>>>>>>> engine >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: Loading >>>>>>>> station type Vantage (weewx.drivers.vantage) >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Driver version is 3.2.1 >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Option loop_request=1 >>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00 >>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Retry #0 failed >>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Retry #1 failed >>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Retry #2 failed >>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG weewx.drivers.vantage: >>>>>>>> Retry #3 failed >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.drivers.vantage: >>>>>>>> Unable to wake up console >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: Import >>>>>>>> of driver failed: Unable to wake up Vantage console (<class >>>>>>>> 'weewx.WakeupError'>) >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** Traceback (most recent call last): >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 119, in >>>>>>>> setupStation >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** self.console = loader_function(config_dict, self) >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 39, in >>>>>>>> loader >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** return VantageService(engine, config_dict) >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1898, >>>>>>>> in >>>>>>>> __init__ >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** Vantage.__init__(self, **config_dict[DRIVER_NAME]) >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 515, >>>>>>>> in >>>>>>>> __init__ >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** self._setup() >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1317, >>>>>>>> in >>>>>>>> _setup >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, >>>>>>>> in >>>>>>>> wakeup_console >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** raise weewx.WakeupError("Unable to wake up Vantage console") >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>> **** WakeupError: Unable to wake up Vantage console >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: Unable to >>>>>>>> load driver: Unable to wake up Vantage console >>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: **** >>>>>>>> Exiting... >>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router Advertisement >>>>>>>> from fe80::724f:57ff:feb7:82a1 >>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>> lease >>>>>>>> >>>>>>>> >>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>> >>>>>>>>> So go ahead and restart it now. >>>>>>>>> >>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote: >>>>>>>>> >>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>> screen: no process found >>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>> Output information may be incomplete. >>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep --color=auto >>>>>>>>>> -e weewxd -e screen >>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>> >>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>> graha...@gmail.com wrote: >>>>>>>>>> >>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ user >>>>>>>>>>> process open on /dev/ttyUSB0 at the moment. not weewxd. probably >>>>>>>>>>> left over >>>>>>>>>>> from earlier troubleshooting. >>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps -ef | >>>>>>>>>>> grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>>> you should now be back to a clean state with /devttyUSB0 ready >>>>>>>>>>> for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>>> >>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <gjrod...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of my >>>>>>>>>>> depth now. >>>>>>>>>>> >>>>>>>>>>> Gary >>>>>>>>>>> >>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote: >>>>>>>>>>> >>>>>>>>>>>> I am using VNC Viewer (and always have) rather than SSH....not >>>>>>>>>>>> sure if that makes any difference? >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd rather >>>>>>>>>>>>> than screen. I will have to defer to Tom or someone who knows >>>>>>>>>>>>> about screen. >>>>>>>>>>>>> >>>>>>>>>>>>> Gary >>>>>>>>>>>>> >>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3c57e3d3-f896-4588-a451-cac0fe57f329n%40googlegroups.com.