it's matthewwall weewx-sdr driver
i just copied and pasted the parts i needed
On Thursday, March 3, 2022 at 12:36:39 PM UTC-6 peterq...@gmail.com wrote:
> Have you considered using Python's JSON function to put the whole thing
> into a dictionary so there's no need for all the if statements?
>
> On Thu, Mar 3, 2022, 10:26 AM an oldman <riderr...@gmail.com> wrote:
>
>> this is the output for rtl_433 -M utc -M protocol -M level -F json
>> command for acurite atlas sensor
>>
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
>> "raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi"
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
>> "raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi"
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
>> "raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi"
>> : -4.499, "snr" : 28.102, "noise" : -32.602}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
>> "strike_distance" : 10, "exception" : 0, "raw_msg" :
>> "81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
>> "strike_distance" : 10, "exception" : 0, "raw_msg" :
>> "85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
>> "strike_distance" : 10, "exception" : 0, "raw_msg" :
>> "89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
>> "snr" : 27.083, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
>> "strike_distance" : 10, "exception" : 0, "raw_msg" :
>> "81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
>> "snr" : 28.326, "noise" : -32.144}
>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
>> "strike_distance" : 10, "exception" : 0, "raw_msg" :
>> "85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
>> "snr" : 28.326, "noise" : -32.144}
>>
>> you could add them to sdr.py i added them for some acurite sensors that
>> did not have them it looks something like
>> # connection diagnostics (-M level)
>> if 'mod' in obj:
>> pkt['mod'] = obj.get('mod')
>> if 'freq' in obj:
>> pkt['freq'] = Packet.get_float(obj, 'freq')
>> if 'rssi' in obj:
>> pkt['rssi'] = Packet.get_float(obj, 'rssi')
>> if 'snr' in obj:
>> pkt['snr'] = obj.get('snr')
>> if 'noise' in obj:
>> pkt['noise'] = obj.get('noise')
>>
>> yes must be in the sensor map
>>
>> here is what is in my for my acurite atlas [sensor_map] for rssi, freq,
>> snr, noise, protocol
>> rssi = rssi.494.AcuriteAtlasPacket
>> freq = freq.494.AcuriteAtlasPacket
>> snr = snr.494.AcuriteAtlasPacket
>> noise = noise.494.AcuriteAtlasPacket
>> protocol = protocol.494.AcuriteAtlasPacket
>>
>> On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 f4n...@gmail.com wrote:
>>
>>> They don't seem to be in sdr.py for my stations. Would it work to add it
>>> manually to sdr.py for the wh65b and whx080?
>>> And do I have to add these to the sensor map?
>>>
>>> an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1:
>>>
>>>> I do know about the skin.conf and Seasons files, but the extensions.py
>>>> and weewx.conf should be ok.
>>>> I backup all of weewx before any upgrade, then check the files i
>>>> modified
>>>>
>>>> for snr/noise/rssi rtl_433 use the -M level switch here is the command
>>>> i use
>>>> /usr/local/bin/rtl_433 -M utc -M protocol -M level -F json
>>>>
>>>> Use "protocol" / "noprotocol" to output the decoder protocol number
>>>> meta data.
>>>> Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta
>>>> data.
>>>> but i don't know if sdr.py puts them in the loop data for all sensors.
>>>> snr/noise/rssi/frequency are not saved to the database so only the
>>>> current tag works for them and to get them formated added to extensions.py
>>>> weewx.units.obs_group_dict['noise'] = 'group_db'
>>>> weewx.units.obs_group_dict['rssi'] = 'group_db'
>>>> weewx.units.obs_group_dict['snr'] = 'group_db'
>>>>
>>>> to get the signal in weewx.conf i have this
>>>>
>>>> [StdCalibrate]
>>>> [[Corrections]]
>>>> rxCheckPercent = rssi + 100
>>>> signal1 = rssi1 + 100
>>>>
>>>> On Thursday, March 3, 2022 at 4:21:32 AM UTC-6 f4n...@gmail.com wrote:
>>>>
>>>>> Thanks it worked!
>>>>>
>>>>> But the <td> tables somehow broke the 2-row listing of the graphs so i
>>>>> left it out for now. As i already got all the graphs i need.
>>>>>
>>>>> Will I have to do modify these files (including skin.conf,
>>>>> extensions.py) again after the update to weewx 4.7?
>>>>>
>>>>> Your SDR setup looks very nicely tweaked. How did you get the
>>>>> snr/noise/rssi and signal quality info and how to put them into weewx?
>>>>>
>>>>> an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1:
>>>>>
>>>>>> i do not have public access to my weather page so if you want to see
>>>>>> some of it these are about a 3rd of it starting at the top
>>>>>>
>>>>>> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote:
>>>>>>
>>>>>>> in Seasons/skin.conf
>>>>>>> plot_groups list the plots to show
>>>>>>>
>>>>>>> moistsoil shows the plots for soilMoist1-4
>>>>>>> tempsoil for soilTemp1-4
>>>>>>>
>>>>>>> if you remove moistsoil, tempsoil from the list will stop showing
>>>>>>> the plots
>>>>>>>
>>>>>>> you would have to add to plot_groups the extra wind stuff say
>>>>>>> extrawind, extrawinddir, then under [ImageGenerator] section you would
>>>>>>> have
>>>>>>> to something like
>>>>>>>
>>>>>>> [[[dayextrawind]]]
>>>>>>> [[[[soilMoist1]]]]
>>>>>>> [[[[soilMoist2]]]]
>>>>>>>
>>>>>>> to do it for week, month, and year for week, month and year add
>>>>>>> aggregate_type = max for week plot something like
>>>>>>>
>>>>>>> [[[weekextrawind]]]
>>>>>>> [[[[soilMoist1]]]]
>>>>>>> [[[[soilMoist2]]]]
>>>>>>> aggregate_type = max
>>>>>>>
>>>>>>> for direction an agian for week, month and year
>>>>>>> [[[dayextrawinddir]]]
>>>>>>> yscale = 0.0, 360.0, 45.0
>>>>>>> line_type = None
>>>>>>> marker_type = box
>>>>>>> marker_size = 2
>>>>>>> [[[[soilTemp4]]]]
>>>>>>>
>>>>>>> in Seasons/current.inc file after the last #end for and before
>>>>>>> </tbody> add something like
>>>>>>>
>>>>>>> <tr>
>>>>>>> <td class="label">Wind Speed</td>
>>>>>>> <td class="data">$current.soilMoist1
>>>>>>> $current.soilTemp1.ordinal_compass ($current.soilTemp1)</td>
>>>>>>> <tr>
>>>>>>>
>>>>>>> no restart is needed for that just the next report cycle
>>>>>>>
>>>>>>> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 f4n...@gmail.com
>>>>>>> wrote:
>>>>>>>
>>>>>>>> As the database is quite new i just deleted the few soilMost3
>>>>>>>> entries out and made a
>>>>>>>>
>>>>>>>> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01
>>>>>>>> --config=/etc/weewx/weewx-sdr.conf
>>>>>>>>
>>>>>>>> and started weewx-sdr again, now it's looking quite good. I'm still
>>>>>>>> trying to figure out how to change the wind direction lines to dots?
>>>>>>>>
>>>>>>>>
>>>>>>>> f4n...@gmail.com schrieb am Dienstag, 1. März 2022 um 13:37:09
>>>>>>>> UTC+1:
>>>>>>>>
>>>>>>>>> That's good to know, so I have to repeat these steps after a weewx
>>>>>>>>> update?
>>>>>>>>>
>>>>>>>>> I have it now running with the additional sensors:
>>>>>>>>> http://meteo.fankyy.ch/WsDi1c_sdr/
>>>>>>>>> Not sure if the rain graph will only appear after it begins with
>>>>>>>>> rain count?
>>>>>>>>>
>>>>>>>>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all
>>>>>>>>> in one graph, with the highest number 360 for wind direction, the
>>>>>>>>> speed is
>>>>>>>>> barely visible. So i use soiltemp4 for the wind direction now and
>>>>>>>>> hope, the
>>>>>>>>> back-to-normal named soilMoist3 will go out of the daily graph after
>>>>>>>>> 24h?
>>>>>>>>> Is there an easy way to delete it out of the database, without having
>>>>>>>>> to
>>>>>>>>> examine/stopping the database for a long time?
>>>>>>>>>
>>>>>>>>> I couldn't find where tho do this step:
>>>>>>>>> then to display wind speed you would use $current.soilMoist1 in a
>>>>>>>>> template
>>>>>>>>> and for wind dir $current.soilMoist2 and/or
>>>>>>>>> $current.soilMoist2.ordinal_compass
>>>>>>>>> in the seasons skin
>>>>>>>>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>>>>>>>>>
>>>>>>>>>> there are other units. just look at the schema file to see what
>>>>>>>>>> there is.
>>>>>>>>>> if your station sends wind gust you could one that's not in use.
>>>>>>>>>> acurite 5n1 do not send wind gust just wind speed and dir. to
>>>>>>>>>> get the extra wind stuff i have to hack weewx files for every weewx
>>>>>>>>>> update.
>>>>>>>>>>
>>>>>>>>>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 f4n...@gmail.com
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> That would be a good and much simpler solution if it works, will
>>>>>>>>>>> definitely try this. Is there some unit remaining which i could use
>>>>>>>>>>> for
>>>>>>>>>>> wind_gust?
>>>>>>>>>>>
>>>>>>>>>>> Thanks a lot!
>>>>>>>>>>>
>>>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>>>>>>>>>>>
>>>>>>>>>>>> you could try something like in this if
>>>>>>>>>>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1,
>>>>>>>>>>>> windBatteryStatus and hail are unsed
>>>>>>>>>>>>
>>>>>>>>>>>> in weewx.conf
>>>>>>>>>>>> [SDR]
>>>>>>>>>>>> [[sensor_map]]
>>>>>>>>>>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
>>>>>>>>>>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
>>>>>>>>>>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2
>>>>>>>>>>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2
>>>>>>>>>>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2
>>>>>>>>>>>> hail_total = rain_total.1276.Acurite5n1PacketV2
>>>>>>>>>>>> [[deltas]]
>>>>>>>>>>>> hail = hail_total
>>>>>>>>>>>>
>>>>>>>>>>>> [Accumulator]
>>>>>>>>>>>> [[hail]]
>>>>>>>>>>>> extractor = sum
>>>>>>>>>>>>
>>>>>>>>>>>> and in extensions.py
>>>>>>>>>>>> import weewx.units
>>>>>>>>>>>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
>>>>>>>>>>>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>>>>>>>>>>>>
>>>>>>>>>>>> then to display wind speed you would use $current.soilMoist1 in
>>>>>>>>>>>> a template
>>>>>>>>>>>> and for wind dir $current.soilMoist2 and/or
>>>>>>>>>>>> $current.soilMoist2.ordinal_compass
>>>>>>>>>>>>
>>>>>>>>>>>> not shure where to change the labels at but i think in 4.6.2 it
>>>>>>>>>>>> is in the lang files
>>>>>>>>>>>> say in en.conf
>>>>>>>>>>>> [Labels]
>>>>>>>>>>>> [[Generic]]
>>>>>>>>>>>> soilMoist1 = Wind Speed (5n1)
>>>>>>>>>>>> soilMoist2 = Wind Direction (5n1)
>>>>>>>>>>>> windBatteryStatus = Battery (5n1)
>>>>>>>>>>>> hail = Rain (5n1)
>>>>>>>>>>>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>>>>>>>>>>>>
>>>>>>>>>>>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> that config won't work with your set up, had to add a lot to
>>>>>>>>>>>>> the sdr driver for sensors, make some extension, add to the
>>>>>>>>>>>>> schema and
>>>>>>>>>>>>> user/extensions.py file and change some weewx core files.
>>>>>>>>>>>>> look in the wiki under data management Switching to the new,
>>>>>>>>>>>>> extended schema wview_extended
>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Switching-to-the-new-wview_extended-schema>
>>>>>>>>>>>>> .
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6
>>>>>>>>>>>>> f4n...@gmail.com wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Now that's really great, thanks for the config. Where or how
>>>>>>>>>>>>>> exactly do i have to add the entrys in the schema file?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11
>>>>>>>>>>>>>> UTC+1:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have
>>>>>>>>>>>>>>> here is my sdr from weewx.conf
>>>>>>>>>>>>>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the
>>>>>>>>>>>>>>> wview_extended.py schema.
>>>>>>>>>>>>>>> I had to add to the schema extrawindSpeed, extrawindDir,
>>>>>>>>>>>>>>> lightning_distance15, lightning_strike_count15 and extraTemp,
>>>>>>>>>>>>>>> batteryStatus, extraHumid 9 - 16.
>>>>>>>>>>>>>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to
>>>>>>>>>>>>>>> combine them to get 1 working 5n1.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6
>>>>>>>>>>>>>>> f4n...@gmail.com wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Would it be possible to record data from two or more full
>>>>>>>>>>>>>>>> sensor arrays (including wind and rain) in one weewx instance?
>>>>>>>>>>>>>>>> Or record
>>>>>>>>>>>>>>>> the data in multiple weewx instances with only one SDR-stick?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I know multiple SDR sticks to multiple weewx instances is
>>>>>>>>>>>>>>>> possible, but how could it be done with just one stick?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I already achieved to get the temperature from a second
>>>>>>>>>>>>>>>> sensor with the extraTempSensor value in the sensor map, but i
>>>>>>>>>>>>>>>> guess this
>>>>>>>>>>>>>>>> wouldn't work for wind and rain? It seems like it would need
>>>>>>>>>>>>>>>> basically only
>>>>>>>>>>>>>>>> an adaption to the schema and database, but to edit these
>>>>>>>>>>>>>>>> seems a bit
>>>>>>>>>>>>>>>> complex for me, has anyone ever done this?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/db3dab70-ffa9-412d-8d8b-1ddddd8dbddcn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/db3dab70-ffa9-412d-8d8b-1ddddd8dbddcn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/49c001f1-2045-40e1-a708-6f9c5fa75eb5n%40googlegroups.com.
