My Vantage Vue is 4 years later, any thoughts if it would run into the same problem?
cserve:/etc/weewx# wee_device --info Using configuration file /etc/weewx/weewx.conf Using Vantage driver version 3.2.3 (weewx.drivers.vantage) Querying... Davis Vantage EEPROM settings: CONSOLE TYPE: Vantage Vue CONSOLE FIRMWARE: Date: May 1 2012 Version: 3.0 On Wednesday, October 26, 2022 at 8:01:41 PM UTC-7 vince wrote: > Testing each later version one-by-one to see when it goes belly up via 'git > checkout revnumberhere -- vantage.py' > > - 4.8.0 version looks ok when dropped into place over 4.9.1 weewx > - may-06th version 7024f seems ok as well > - may-18th version b0145 fails repeatedly with the 'max tries > exceeded' error > > debug=1 syslog entries from 'grep vantage /var/log/syslog' are in the > attachment. > I used 'logger' to write out which version driver I was starting up.... > > On Wednesday, October 26, 2022 at 3:46:35 PM UTC-7 Tom Keffer wrote: > >> How about trying the old V4.8.0 driver in v4.9.1? You can find it here: >> https://raw.githubusercontent.com/weewx/weewx/v4.8.0/bin/weewx/drivers/vantage.py >> >> On Wed, Oct 26, 2022 at 3:12 PM vince <vince...@gmail.com> wrote: >> >>> Almost every single time. Not 100% but pretty close. >>> >>> - I put the 4.9.1 driver on my working 4.8.0 system, deleted the >>> __pycache__ file for it, and started weewx up and it 'did' recreate the >>> problem. Failed immediately and kept failing. >>> >>> >>> - I also repeated the test with the extra sensors stuff set to { } >>> and it didn't fix it. So I'm guessing it's the issue-772 mods are at >>> fault. >>> >>> If you can get me a driver with issue-772 backed out or with more >>> diagnostic logging etc added I'd be happy to do more tests to try to figure >>> it out. >>> >>> Lastly, FWIW, I'm running a VP2 with rather old firmware, if that >>> matters. >>> >>> Davis Vantage EEPROM settings: >>> >>> CONSOLE TYPE: Vantage Pro2 >>> >>> CONSOLE FIRMWARE: >>> Date: Jul 14 2008 >>> Version: 1.80 >>> >>> CONSOLE SETTINGS: >>> Archive interval: 300 (seconds) >>> Altitude: 365 (foot) >>> Wind cup type: large >>> Rain bucket type: 0.01 inches >>> Rain year start: 10 >>> Onboard time: 2022-10-26 15:10:05 >>> >>> CONSOLE DISPLAY UNITS: >>> Barometer: inHg >>> Temperature: degree_F >>> Rain: inch >>> Wind: mile_per_hour >>> >>> CONSOLE STATION INFO: >>> Latitude (onboard): +47.3 >>> Longitude (onboard): -122.3 >>> Use manual or auto DST? AUTO >>> DST setting: N/A >>> Use GMT offset or zone code? GMT_OFFSET >>> Time zone code: N/A >>> GMT offset: -8.0 hours >>> Temperature logging: LAST >>> Retransmit channel: OFF (0) >>> >>> TRANSMITTERS: >>> Channel Receive Repeater Type >>> 1 active none iss >>> 2 inactive none (N/A) >>> 3 inactive none (N/A) >>> 4 inactive none (N/A) >>> 5 inactive none (N/A) >>> 6 inactive none (N/A) >>> 7 inactive none (N/A) >>> 8 inactive none (N/A) >>> >>> RECEPTION STATS: >>> Total packets received: 255 >>> Total packets missed: 3 >>> Number of resynchronizations: 0 >>> Longest good stretch: 122 >>> Number of CRC errors: 0 >>> >>> BAROMETER CALIBRATION DATA: >>> Current barometer reading: 30.130 inHg >>> Altitude: 365 feet >>> Dew point: 44 F >>> Virtual temperature: 46 F >>> Humidity correction factor: 1.9 >>> Correction ratio: 1.014 >>> Correction constant: +0.000 inHg >>> Gain: 0.000 >>> Offset: 35.000 >>> >>> OFFSETS: >>> Wind direction: +0 deg >>> Inside Temperature: +0.0 F >>> Inside Humidity: +0 % >>> Outside Temperature: +0.0 F >>> Outside Humidity: +0 % >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/87a9b91d-265d-4c51-9fcf-4d8c7370a3dfn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/87a9b91d-265d-4c51-9fcf-4d8c7370a3dfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f28d3e67-3ccd-4061-8c3e-cc5476fe1260n%40googlegroups.com.