Hi Vince, Thank you for replying. It turns out, it was something simple as usual. It's not starting at power-up and in my haste to recognize that, I reset the Ethernet to serial adapter to factory defaults which set the baud rate to 115200. Once I set it back to 19200 and started weewx, it began reporting. I'm still having an issue with it starting after reboot, but I think I can resolve it without too much trouble. I'd like to hear any suggestions you have for that issue though.
As far as the complexity of my setup, I originally started out with the Davis Instruments serial module on a PC which was kind of pricey back in the early 2000s. The NetBurner approach let me keep my existing hardware and add it to my home network for a reasonable cost. Thanks again! Bill On Friday, January 26, 2024 at 11:11:19 AM UTC-7 vince wrote: > On Friday, January 26, 2024 at 9:33:35 AM UTC-8 Bill Hattel wrote: > > I'm having the same issue after an upgrade to 5.0.0-1. I inspected the > configuration file even though I selected no changes and found everything > was correct. I also completely removed weewx and reinstalled it with a new > configuration file. I can communicate with the Davis console through > WeatherLink with the same settings and interface with no issue. The port is > closed when WeatherLink exits. > > Davis Vantage Vue > Raspberry PI > NetBurner SBL2E Dual Serial to Ethernet converter > Homemade RS-232 level shifter. > > > Hmmm....that's pretty unusual/exotic hardware connecting the Vue to the > pi.... > > > Jan 25 19:44:10 raspberrypi weewxd[298]: ERROR weewx.drivers.vantage: > Socket error while opening port 23 to ethernet host 192.168.50.39. > <<<< ******************** this line ************************ > Jan 25 19:44:10 raspberrypi weewxd[298]: ERROR weewx.engine: Import of > driver failed: [Errno 101] Network is unreachable (<class > 'weewx.WeeWxIOError'>) > ] > > Jan 25 19:44:10 raspberrypi weewxd[298]: CRITICAL __main__: Unable to load > driver: [Errno 101] Network is unreachable > Jan 25 19:44:10 raspberrypi weewxd[298]: CRITICAL __main__: **** > Exiting... > Jan 25 19:44:10 raspberrypi systemd[1]: weewx.service: Main process > exited, code=exited, status=4/NOPERMISSION > > > Network unreachable is a different issue than others are having. > > What's your weewx system ip ? What is the ip you are trying to talk to ? > If they're on different networks you are possibly missing a route on your > weewx system. From the weewx system you might try "traceroute -n > 192.168.50.39" if the destination address in your logs is correct. > > This one looks like a routing or packet filter issue on a router in > between the weewx box and the serial-to-ethernet converter 'if' they are on > different subnets > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2c296dbd-205d-4dcd-9cb4-96f3cc952dbbn%40googlegroups.com.
