Cool you solved it. Wouldn't have thought that a baud rate thing would get you network unreachable.
On Saturday, January 27, 2024 at 8:59:15 AM UTC-8 Bill Hattel wrote: > Hi Vince, > Thank you for replying. It turns out, it was something simple as usual. > It's not starting at power-up and in my haste to recognize that, I reset > the Ethernet to serial adapter to factory defaults which set the baud rate > to 115200. Once I set it back to 19200 and started weewx, it began > reporting. I'm still having an issue with it starting after reboot, but I > think I can resolve it without too much trouble. I'd like to hear any > suggestions you have for that issue though. > > As far as the complexity of my setup, I originally started out with the > Davis Instruments serial module on a PC which was kind of pricey back in > the early 2000s. The NetBurner approach let me keep my existing hardware > and add it to my home network for a reasonable cost. > > Thanks again! > Bill > > On Friday, January 26, 2024 at 11:11:19 AM UTC-7 vince wrote: > >> On Friday, January 26, 2024 at 9:33:35 AM UTC-8 Bill Hattel wrote: >> >> I'm having the same issue after an upgrade to 5.0.0-1. I inspected the >> configuration file even though I selected no changes and found everything >> was correct. I also completely removed weewx and reinstalled it with a new >> configuration file. I can communicate with the Davis console through >> WeatherLink with the same settings and interface with no issue. The port is >> closed when WeatherLink exits. >> >> Davis Vantage Vue >> Raspberry PI >> NetBurner SBL2E Dual Serial to Ethernet converter >> Homemade RS-232 level shifter. >> >> >> Hmmm....that's pretty unusual/exotic hardware connecting the Vue to the >> pi.... >> >> >> Jan 25 19:44:10 raspberrypi weewxd[298]: ERROR weewx.drivers.vantage: >> Socket error while opening port 23 to ethernet host 192.168.50.39. >> <<<< ******************** this line ************************ >> Jan 25 19:44:10 raspberrypi weewxd[298]: ERROR weewx.engine: Import of >> driver failed: [Errno 101] Network is unreachable (<class >> 'weewx.WeeWxIOError'>) >> ] >> >> Jan 25 19:44:10 raspberrypi weewxd[298]: CRITICAL __main__: Unable to >> load driver: [Errno 101] Network is unreachable >> Jan 25 19:44:10 raspberrypi weewxd[298]: CRITICAL __main__: **** >> Exiting... >> Jan 25 19:44:10 raspberrypi systemd[1]: weewx.service: Main process >> exited, code=exited, status=4/NOPERMISSION >> >> >> Network unreachable is a different issue than others are having. >> >> What's your weewx system ip ? What is the ip you are trying to talk to ? >> If they're on different networks you are possibly missing a route on your >> weewx system. From the weewx system you might try "traceroute -n >> 192.168.50.39" if the destination address in your logs is correct. >> >> This one looks like a routing or packet filter issue on a router in >> between the weewx box and the serial-to-ethernet converter 'if' they are on >> different subnets >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c6dd4f7f-625a-477b-9c0e-dfdad8bc9eben%40googlegroups.com.