We have upgraded the C1200 Aps to LWAPP mode. Here is the link we followed: http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_ref erence09186a00804fc3dc.html
Either layer 2 or layer 3 would work. AP uses subnet broadcast to find controller at layer 2 and uses dhcp option 43 or dns resolution to find controller at layer 3. Dennis Xu Network Analyst (CCS) University of Guelph 519-824-4120 x 56217 [EMAIL PROTECTED] -----Original Message----- From: Jorge Bodden [mailto:[EMAIL PROTECTED] Sent: Thursday, February 15, 2007 2:12 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: [WIRELESS-LAN] Upgrade 1200 to lwapp I was wondering if anyone out there has upgraded their Cisco 1200 APs to the code that is supposed to do LWAPP? I have looked at the documentation that Cisco provide. But I did not find anything about the setup. Does it work at layer 3 or layer 2? Do you still let the APs that IP address of the controllers through option 43 or is there some other mechanism? Any help on this matter would be greatly appreciated. Thanks Jorge Bodden -------------------- This electronic message is intended to be for the use only of the named recipient, and may contain information that is confidential or privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this message is strictly prohibited. If you have received this message in error or are not the named recipient, please notify us immediately by contacting the sender at the electronic mail address noted above, and delete and destroy all copies of this message. Thank you. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.