Lee lwap transport mode is layer 3 No blades -stand alone 4402 and system loads are not /*really*/ that high at 440 wireless clients.

Steve

Lee H Badman wrote:

And I also wonder- are these 6500s also routing, or just hosting the WiSMs at layer 2?

Thanks-

Lee H. Badman

Wireless/Network Engineer

Information Technology and Services

Syracuse University

315 443-3003

------------------------------------------------------------------------

*From:* The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[EMAIL PROTECTED] *On Behalf Of *Johnson, Bruce T
*Sent:* Tuesday, March 25, 2008 12:28 PM
*To:* WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
*Subject:* Re: [WIRELESS-LAN] Anyone using 5.0 Cisco WiSM/WLC code?

Hey Steve,

Curious as to those high load hangs. We're running 4.2.99 on several WiSM-based controllers. What's the symptom? Do you have to reboot the controllers?

Thanks,

/*************************************/

/Bruce T. Johnson/

/Network Engineer/

/Partners Healthcare/

/617-726-9662/

/mailto:[EMAIL PROTECTED]/

/**************************************/

------------------------------------------------------------------------

*From:* The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[EMAIL PROTECTED] *On Behalf Of *Steve Whitson
*Sent:* Tuesday, March 25, 2008 12:08 PM
*To:* WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
*Subject:* Re: [WIRELESS-LAN] Anyone using 5.0 Cisco WiSM/WLC code?

Hi Peter I have been experiencing high load hangs on v 4.2.099.0 and wanted to migrate to V5.0 for more stability. However v5.0 is not compatible with Cisco Aironet 1000 Series Access Points. "The 1000 series access points are not supported for use with controller software release 5.0.148.0". Must use 1130 series AP and above. It looked like there was no planed improvement to the 4.x code leaving many of us with a large and */costly /*legacy system in place.

I thought that ought v4.2.099.0 to be the latest code you can run on the Cisco 4400 standalone controllers with 1000 series access points however, I just noted that on March 17 v4.2.112.0 is released. Nothing above v4.1.185.0 is assure ware certified however. I am now looking at v4.2.112.0 trying for more stability...

--
 Steve Whitson
Network / Telecom Administrator
Educational Technology Services
California College of the Arts
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>


Peter Arbouin wrote:

Hi,

I would be interested to hear from anyone who has upgraded to version 5.0 as we are considering upgrading.

Regards,

Peter.

********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.

--
 Steve Whitson
Network / Telecom Administrator
Educational Technology Services
California College of the Arts
Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
The information transmitted in this electronic communication is intended only
for the person or entity to whom it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or other
use of or taking of any action in reliance upon this information by persons or
entities other than the intended recipient is prohibited. If you received this
information in error, please contact the Compliance HelpLine at 800-856-1983 and
properly dispose of this information.
********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.

--
Steve Whitson
Network / Telecom Administrator
Educational Technology Services
California College of the Arts
Phone: 415.703.9507
Email: [EMAIL PROTECTED]



++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

This e-mail and any files transmitted with it may contain privileged or
confidential information. It is solely for use by the individual for whom it is intended even if addressed incorrectly.
If you received this e-mail in error, please notify the sender; do not 
disclose, copy, distribute, or
take any action in reliance on the contents of this information; and
delete it from your system. Any other use of this e-mail is prohibited.
Thank you for your compliance.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

Reply via email to