Can you export the report as a CSV and do a sort or filter based on "0" clients for a radio? You will probably get a lot of false positives such as after hours but you could further filter the list till you get something manageable.
There is also a dead radio report. It is under the inventory report and then change the drop down to "dead radio". I am not 100% sure what or how is classified as a dead radio. -Jimmy On Sun, Mar 23, 2014 at 9:00 PM, Peter Arbouin <p.arbo...@qut.edu.au> wrote: > Hi, > > > > I was wondering if anyone has been able to run a report that identifies > unused radios of using Cisco Prime 1.4. > > > > We recently found a room with two access points where a client couldn't > connect. It turned out that even though the 2.4 radio reported as being on > and functioning, no clients could connect. One stopped working a few weeks > ago, and the other three days ago. The 5GHz radios were working fine and > had clients associated to both access points. > > > > I ran the "Client Count" report for the affected floor from the Client > Reports section and this was ok for a small area, as it reports all the > access points in a graph format, and allowed me to select by radio type. > > > > It got me wondering how many other radios may have a similar problem. > > > > If I run this report for all our access points, there is no sort function, > so you have to manually look through all the graphs. > > > > In the Device section, there is a "Top AP by Client Count" This is a handy > report, as it gives a numeric output and can be sorted, but it seems to be > total clients for the AP and there is no option to report on just specific > radio type, so I can only assume that this report only reports access > points with no associations on any radio. > > > > Any assistance would be greatly appreciated. > > > > Thanks, > > > > Peter. > > > > > > > *Peter Arbouin | Network Engineer *IT Networks | Information Technology > Services > Queensland University of Technology > Level 3 | 88 Musk Avenue | Kelvin Grove Campus > > Mob: 0402476892 | Ph: +61 7 3138 1030 > > Email: p.arbo...@qut.edu.au > > > CRICOS No. 00213J > > > ********** Participation and subscription information for this EDUCAUSE > Constituent Group discussion list can be found at > http://www.educause.edu/groups/. > > -- James Helzerman Wireless Network Engineer University of Michigan - ITS Communications Systems and Data Centers Phone: 734-615-9541 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.