Good morning everyone - We here at Penn have recently come across a strange issue with Windows 10 and our new JoinNow installation.
The run down goes like this: 1) Connect to onboarding SSID 2) Run JoinNow 3) Authentication Loop on Windows 10 Doing some research into it, there are a couple of things we noticed: a) If we turn off server validation, the Windows 10 device connects fine. b) looking at a packet trace, the device just stops responding to the RADIUS server after the server cert has been pasted to the client. c) we have to re-install the wireless driver on the device to be able to get the device working again. d) Our old CloudPath installation appears to be resulting in the same thing. We are running EAP-TTLS/EAP-PAP here. I was curious if anyone else was seeing issues with Windows 10 devices following the latest patching from Microsoft. -- Charles Rumford Senior Network Engineer ISC Tech Services University of Pennsylvania OpenPGP Key ID: 0x173F5F3A (2018/07/05) ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss.