All, The link below is the DECT phone system I was speaking about earlier. http://tinyurl.com/2l2ktq
We use these phones on our VOIP service and have all the features we need. Regards, Dawn DiPietro On 3/22/07, John Scrivner <[EMAIL PROTECTED]> wrote:
Do you have a link to the rules governing how this spectrum can be used, how it is licensed, who you have to pay what to use it, etc.? I would like to research this in more detail. Is this opportunity still available or is this spectrum now gone elsewhere? Is this what DECT is using? Did they pay the fees? I am trying to understand all the issues being discussed here and feel I am missing important facts. Thank you, Scriv Rich Comroe wrote: >Did you look at the UTAM URL? The fee until recently was $20 per device!!!!!!!! A market killer if I've ever seen one, especially when the manufacturing cost of a simple home phone is in that range! We'll see if this changes now that the UTAM prices have gone down. My thoughts is that the window of opportunity has long passed (there's no up front fee to continue making products only for the 900, 2.4, & 5GHz UL bands that we wished they'd stop using). What exactly is a manufacturer's incentive to switch to 1.9GHz where there's a stiff UTAM fee? > >I used to work for a very, very, very large US manufacturer, and all UL business phone development in 1.9GHz have long ago (years ago) been permenantly cancelled to my best knowledge. > >Rich > ----- Original Message ----- > From: John Scrivner > To: WISPA General List > Sent: Thursday, March 22, 2007 12:31 PM > Subject: Re: [WISPA] Using DECT phones to avoid interference issues. > > > $50K up front and 50 cents a device to control an entire band in the US > sounds like a pretty cheap deal to me. I am surprised nobody jumped on > that. I do not see that as too much to pay and I am very surprised this > did not take off. I hate it when opportunity is right in front of my > face and I am too blind to see it! > Scriv > > > Rich Comroe wrote: > > >>I haven't seen but one DECT phone here and it was very basic, but I expect > >>that the technology will quickly be expanded to products like the multi > >>handset systems, etc that are getting popular from Uniden and all the > >>others. > >> > >> > > > >There's a reason you haven't seen these products here. I began searching for why the last time a thread discussed the 1.9GHz UL band surfaced on this list. I doubt you'll ever see much product ever emerge for this band in the United States. There's a reason for this too ... > > > > > >I've heard some discussion on this list regarding how "the FCC gave the industry UL spectrum and they didn't use it." With such a connection, wisps must understand why this band has been underutilized here (as well as judging the chances of new products emerging). > > > >Years ago the FCC took this band away from Pt-Pt microwave users. They authorized a group called UTAM to pay what was necessary to move these microwave users to clear the band. Apparently UTAM spent "whatever it took" since it wasn't there money. Manufacturers wanting to field UL product had to pay UTAM what were known as "clearing fees". Check out http://www.utam.org/ClearingFees.html. Prior to April 1 2005 the clearing fees were enough to dissuade any manufacturer from building UL product for the United States! IMHO the UTAM fees doubled the cost of producing UL product. Since April 1 2005 the fees drop to a mere 50 cents per radio, but a manufacturer must still pay UTAM $50,000 up front. With the lack of products, UTAM has amassed a huge debt. > > > >The FCC groundrules for clearing the Pt-Pt users from the band were more than enough to insure that this UL band would never be effectively utilized in the United States. > > > >Just my opinion, > >Rich > > ----- Original Message ----- > > From: Ralph > > To: 'WISPA General List' > > Sent: Thursday, March 22, 2007 11:45 AM > > Subject: RE: [WISPA] Using DECT phones to avoid interference issues. > > > > > > I deployed a DECT (Digital European Cordless Telecommunications) system with > > 450 handsets several years ago. > > > > The phones were single line units made by Phillips. They system worked OK, > > but the features were very lacking. The frequency range was 1880-1900 MHz > > This deployment was in Paris, France and was connected behind a PBX. There > > were about 21 "base stations", each one capable of supporting many > > conversations. > > > > The DECT system is interesting because it is the standard in Europe and > > people's home handsets could be registered on this system. All I had to do > > was enter the code # into the management system. We were afraid that the > > handsets might begin disappearing due to the interoperability, but these > > handsets were so cheesy that the home models were much better. > > > > The DECT system did handoff calls as the users walked between base stations, > > which was pretty cool. > > > > A year or so aqo, DECT was authorized here in the US, on slightly different > > frequencies: 1920-1930 MHz. There was not any general hoopla at all around > > this introduction. > > > > DECT isn't GSM, but the two are made to be very compatible and in Europe, > > there are dual mode DECT/GSM phones. These systems, which are sometimes > > used in installations like mine, allow the user to switch over to a more > > cost-effective DECT connection when in range, and the GSM signaling is > > passed over to the DECT system, but in DECT format. > > > > I haven't seen but one DECT phone here and it was very basic, but I expect > > that the technology will quickly be expanded to products like the multi > > handset systems, etc that are getting popular from Uniden and all the > > others. > > > > It should eliminate all WISP interference for sure! > > > > Ralph > > > > > > > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Dawn DiPietro > > Sent: Thursday, March 22, 2007 9:54 AM > > To: WISPA General List > > Subject: [WISPA] Using DECT phones to avoid interference issues. > > > > All, > > > > I am sure some of you have already thought of this but I would suggest a > > great alternative to avoid interference with the most common frequencies > > used to deploy wireless networks would be to use DECT cordless phones in > > the house. They use the 1.9Ghz frequency and are relatively inexpensive. > > We use a DECT phone system here with all the features we could ever ask > > for and we got them for a song after the rebate. > > > > Just a thought. > > > > Regards, > > Dawn DiPietro > > -- > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -- > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
