Hello Bryan,

Ok, you have definitely shorter cable runs than we do.  The cable loss
settings may not be as important in your case, but why a split cable on Site
A?  Twice the chance of connector problems at Site A.  Any chance of
replacing the two cables at Site A with one LMR-400 cable?

I know this is a basic question, but have you confirmed the cables and all
RF connectors are good?

What power supplies are you using?  I'd also suggest upgrading firmware.  We
just upgraded ours today:

Site A:

(trango-view)# ver
Current Image Version
IDU FPGA version:       00100108
IDU OS version:         2p6r14b3D01110801
IDU FW version:         2p0r1D01110801
IDU PIC version:        18
IDU Modem version:      40
ODU FW version:         07

Previous Image Version:
IDU FPGA version:       02080907
IDU OS version:         2p6r14b3D09120701
IDU FW version:         1p0r1D09120701
IDU PIC version:        3
ODU FW version:         07
(trango-view)# cab
cable loss at 140 Mhz: 4.45 dB
cable loss at 315 Mhz: 6.76 dB
cable loss at 915 Mhz: 11.81 dB
(trango-view)#


Site B:

(trango-view)# ver
Current Image Version
IDU FPGA version:       00100108
IDU OS version:         2p6r14b3D01110801
IDU FW version:         2p0r1D01110801
IDU PIC version:        18
IDU Modem version:      40
ODU FW version:         07

Previous Image Version:
IDU FPGA version:       02080907
IDU OS version:         2p6r14b3D09120701
IDU FW version:         1p0r1D09120701
IDU PIC version:        3
ODU FW version:         07
(trango-view)# cab
cable loss at 140 Mhz: 5.34 dB
cable loss at 315 Mhz: 8.11 dB
cable loss at 915 Mhz: 14.17 dB
(trango-view)#


Best,



Brad



-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Bryan Scott
Sent: Wednesday, January 16, 2008 11:19 AM
To: WISPA General List
Subject: Re: [WISPA] Looking for short licensed link

Brad Belton wrote:

> If you like, please provide me the cable length and type on each end.
Then
> provide me the loss figures you have entered for each side.  We'll compare
> notes between yours and ours.
> 
> What version are you running?

Side A - 50' of LMR400 + 17' of RG58 (or 59, whatever the 50 Ohm stuff is):

Cable Loss 140: 1.20
    
Cable Loss 315: 2.08
    
Cable Loss 915: 3.45


Side B - 54' of LMR400:

Cable Loss 140: 0.70
    
Cable Loss 315: 1.10
    
Cable Loss 915: 1.96

On Both:

ATPC: Off
Rate Shift: Off
ODU RXGain: On








----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to