Hi, You are correct... my mistake.
However, the MM5 was going to be 5ghz along with an MM2 (2.4ghz) and MM9 (900mhz)... but as you mentioned, the products have been discontinued. Which really leaves me wondering what Trango is going to be selling? Their 5 year old product is getting slow, and is still very expensive. :( Travis Charles Wu wrote: > Travis, > > The Trango 5830 / 900 / 2400 were up/down-coverted 802.11b - not 802.11a > systems > > The only 802.11a multipoint system that Trango had was MM5, and it is my > understanding that (1) it was never for 900 MHz and (2) it has been put on > hold / discontinued > > -Charles > > ------------------------------------------- > WiNOG Wireless Roadshows > Coming to a City Near You > http://www.winog.com > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson > Sent: Friday, July 18, 2008 1:08 AM > To: WISPA General List > Subject: Re: [WISPA] top 10 benefits of Wimax in 3.65ghz - my 2 cents > > What about Trango? > > Charles Wu wrote: > > So, what down converted 802.11a systems are there for 900? > > > > > > Mini-PCI: > > Ubiquiti > > Zcomax > > > > Vendor Solutions: > > Tranzeo > > Alvarion > > Vecima/WaveRider > > Wu-Wu Special* > > > > *We are doing some exploratory investigation =) > > > > -Charles > > > > ----- Original Message ----- > > From: "Charles Wu" <[EMAIL PROTECTED]><mailto:[EMAIL PROTECTED]> > > To: "WISPA General List" <wireless@wispa.org><mailto:wireless@wispa.org> > > Sent: Thursday, July 17, 2008 9:19 PM > > Subject: Re: [WISPA] top 10 benefits of Wimax in 3.65ghz - my 2 cents > > > > > > > > Even thought this thread is a bit old, couldn't help but add my 2 cents > > (as there seems to be a resurgence of "puff" in this space) > > > > > > > > DISCLAIMER: I am also a vendor of various WiMAX 802.16d systems - so feel > > free to apply your necessary 'BS' filter > > > > > > > > > > > > Benefits of Wimax in 3.65ghz > > > > > > > > 1. Spectral efficiency ( 4.85 gross bp/hz ) On a six sector > > > > configuration with only 25mhz of spectrum, you can effectively deliver > > > > approx 20mb per sector or 120 mb / per pop, 240 mb when all 50 mhz is > > > > supported. Support for thousands of subscribers is possible off the same > > > > BSU. > > > > > > > > This isn't all too exciting, IMO - there are plenty of systems out there > > that have similar (if not better) spectral efficiency characteristics as > > to what the WiMAX 802.16d standard offers...also, with the uncertainties > > of 3650 licensing, which is, from an interference protection perspective, > > not that much different that Part-15, higher order modulation schemes > > don't do much in the presence of noise > > > > > > > > Case in point: Why does everyone keep using Canopy 900 MHz systems when > > you can get an 802.11a OFDM-based down-converted system that delivers 3-4x > > the throughput? Well, it's a matter of what's actually going to work in > > the crowded 900 MHz band. > > > > > > > > > > > > 2. multiple vendor support ( currently you have Redline, Aperto, > > > > Airspan, Alvarion, all with FCC approved equipment ) > > > > > > > > The "concept" of interoperability is one of the most "oversold" features > > of WiMAX which needs to be explained... > > > > > > > > Fictitious Scenario: > > > > > > > > Say I had deployed Brand A system for my business users, and in order to > > enable VoIP services, I enable a variety of the more advanced MAC features > > (rTP for my VoIP)...I set up a variety of service flows that are > > customized to each user...blah blah blah > > > > > > > > Problem is, Brand A system, for whatever reason, didn't support UGS and a > > few esoteric service flow / packet filtering features, but at the time, > > I'm really not too concerned because (a) my customers don't demand UGS > > from me right now and (b) the concept of "WiMAX interoperability" story > > gives me the conclusion that if I really need UGS, I could just buy / > > upgrade to Brand X system and retain all of my Brand A CPEs that I've > > deployed. > > > > > > > > Now, 6 months later, I've deployed 50 CPE in the field, and business is > > doing good...so good in fact that 2 customers want to upgrade to a > > "premium" service that requires features not currently supported on Brand > > A AP. Luckily, I have a "WiMAX" system so I go upgrade Brand A AP with > > Brand X. Common sense would lead me to believe that Brand X would support > > all of my CPE's features, plus supporting the enhanced feature of UGS that > > I need > > > > > > > > Sorry, isn't going to work > > > > > > > > As things turn out, the only "interoperability" testing done between Brand > > A CPEs and Brand X APs were done at the Best Effort feature set (basic > > Ethernet connectivity)...additionally, Rf interoperability was done at a > > 3.5 MHz channel size, and I've been running Brand A at 10 MHz to maximize > > my throughput (oh, and Brand X only supports 3.5 MHz, 5 MHz & 7 MHz > > channel sizes)...so to get this interoperability, I lose all of my rTP / > > VoIP prioritization for my entire network, or I have to go out and replace > > my 20 Brand A CPEs that are running VoIP with Brand X CPEs > > > > > > > > Oops > > > > > > > > What's the moral of the story? > > > > > > > > Ultimately, unless you're willing to run your network at the lowest common > > denominator, you're basically buying into a proprietary system. > > > > > > > > 3. Better RF performance ( even with siso systems ) > > > > > > > > Better RF performance as compared to what? And in what vein? > > > > > > > > I can easily "slant" the argument the other way by bringing up an example > > where a proprietary system outperforms WiMAX > > > > > > > > Noise Immunity: Are you saying that WiMAX has better noise immunity that > > Canopy (OFDM vs. FSK...yeah right) > > > > NLOS: Are you saying that WiMAX can do better NLoS than 900 MHz? > > > > Urban Reflective NLOS: Are you saying that WiMAX can do better Urban NLoS > > than a MIMO-based 1024-FFT OFDM system? > > > > > > > > 4. NLOS performance ( OFDM+OFDMA = More difficult shots obtain link ) > > > > > > > > See above > > > > > > > > 5. Better QOS support, and service flows ( UGS, NRTPS, ETC can be ) > > > > > > > > There can be an argument made that the WiMAX MAC is much more > > sophisticated than the Canopy / Alvarion VL / Trango / Tranzeo / CSMA-CA > > systems on the market today...that said, don't forget that there is a > > $$$COST$$$ for this sophistication...namely, you effectively lock yourself > > into a "proprietary" implementation of your WiMAX system > > > > > > > > 6. Greater scalablity ( Single sector can support hundreds of > > > > subscribers, our platform supports 30,000 pps ) > > > > > > > > WiMAX in it's true tested and interoperable state maxes out at an > > aggregate "throughput" range of ~10 Mbps per AP > > > > > > > > To get better performance (up to 20 Mbps / AP), I give up interoperability > > > > > > > > > > > > 7. Support for multiline VOIP out of box ( UGS + 30K PPS ) > > > > > > > > At the expense of interoperability > > > > > > > > 8. Sub 350 cpe shipping today ( in 100 packs, less with frame order > > > > commitments putting your cost sub 300 ) > > > > > > > > Ubiquiti Lightstations are sub-$100 > > > > Tranzeos / Deliberant / whatever are in the $100-200 range > > > > Motorola Canopy / Alvarion is in the $200-300 range > > > > > > > > Oh, and they (just like WiMAX) are basically proprietary > > > > > > > > 9. Carrier class systems vs Wisp class ( True 99.999% uptime solutions > > > > available for base station equipment, reducing downtime and truck rolls > > > > ) > > > > > > > > Carrier Class = $10k APs > > > > If you're willing to spend $10k for an AP - you can get a proprietary > > 'WISP' system that has all the "carrier-class" features of "WiMAX" > > > > > > > > 10. Carrier class network management systems that simplify provisioning > > > > and management of subscribers and base stations. > > > > > > > > Lol...I find this amusing...as the WiMAX specification "overcomplicates" > > the provisioning process, so you now have the need to purchase a system to > > simplify provisioning so it will work like a Canopy / Trango / Tranzeo / > > Alvarion =) > > > > > > > > Supply and Demand at its best =/ > > > > > > > > That said, if you are still interested in WiMAX after this "cold dose of > > reality," we have plenty of radios in stock =) > > > > > > > > -Charles > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/