queue export Ip firewall expo Or for just mangle...
Ip firewall mangl expo On 3/2/10, Greg Ihnen <os10ru...@gmail.com> wrote: > Wow! Thanks! How about the queues? Is there a way to export the queues? How > about the firewall filter rules, nat and mangle? > > Greg > > On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: > >> Greg, >> >> Yes there is >> >> /ip address export file=ipaddr86 >> /ip route export file=iprout86 >> >> Then... >> >> /import file=iproute86.rsc >> /import file=ipaddr86.rsc >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> “Success is not final, failure is not fatal: it is the courage to continue >> that counts.” >> --- Winston Churchill >> >> >> On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <os10ru...@gmail.com> wrote: >> >>> Thanks. No, I didn't have the right default route to the outside world. >>> >>> The problem is definitely connected with routes. Thanks for pointing me >>> there. I have another router (x86) set up here and I took a look at the >>> routes there and I could see what was missing. It was the route with a >>> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >>> modem) with a distance of 1, scope of 30 and target scope of 10. With >>> that >>> one static route in it populates other dynamic discovered routes and it >>> all >>> works. >>> >>> But there's a complication too and that is if I reset the RB750 and then >>> configure it and get the routes right it works as I said above. But if I >>> take a more complicated setup I had configured and backed up and load >>> that >>> and then set everything right (including the routes) it still won't work! >>> The backup was made under 4.3 and the unit is now running 4.5. I don't >>> know >>> if that could be it. Anyway, it seems like I can make it work, I just >>> have >>> to go through all the trouble of configuring it all again. >>> >>> What a pain there's no way to take an x86 config and load it on an RB750. >>> >>> Thanks to all who replied. >>> >>> Greg >>> >>> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >>> >>>> Did you set the correct default route on the 750? >>>> >>>> Greg Ihnen wrote: >>>>> I have an RB750 which I'm trying to install. It's not my first. The >>> modem is not acting as a DHCP server so I have to config the WAN port >>> (Eth1 >>> Gateway) manually. When I've configured the modem (using NAT) I can't >>> access >>> or ping the internet. I can ping the modem. So pings get to the modem but >>> not ip address of servers I know on the internet. Anyone have any idea >>> what >>> this could be? I even downloaded a config from a working RB750 I have at >>> another location, edited the config so it was no longer using DHCP on >>> Eth1, >>> manually configured Eth1, and nothing. Again I can ping the modem but >>> nothing beyond it. >>>>> >>>>> Thanks in advance. >>>>> >>>>> Greg >>>>> >>>>> >>>>> >>> -------------------------------------------------------------------------------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>> -------------------------------------------------------------------------------- >>>>> >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> >>>> >>>> -- >>>> Scott Reed >>>> Sr. Systems Engineer >>>> GAB Midwest >>>> 1-800-363-1544 x4000 >>>> Cell: 260-273-7239 >>>> >>>> >>>> >>>> >>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
