And it will drive you nuts. Especially if you use it to template and get multiple CPEs with the same MAC on one AP. Augh...
On 3/2/10, Scott Reed <scottr...@onlyinternet.net> wrote: > Be careful with exporting interfaces. It takes the MAC address and sets > it on the new device. You can just delete the MAC=xx:xx:xx:xx:xx:xx in > WordPad, save the file and then import it. > > Greg Ihnen wrote: >> Could I just export Interface,and all of IP, and all of Queue? That way it >> would be just three files and it would have all my config. Is there >> anything in the exports which is MAC address specific (specific to the x86 >> hardware) that won't work in the RB750? >> >> Thanks! >> Greg >> >> On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: >> >> >>> Greg, >>> >>> Yes there is >>> >>> /ip address export file=ipaddr86 >>> /ip route export file=iprout86 >>> >>> Then... >>> >>> /import file=iproute86.rsc >>> /import file=ipaddr86.rsc >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> “Success is not final, failure is not fatal: it is the courage to >>> continue >>> that counts.” >>> --- Winston Churchill >>> >>> >>> On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <os10ru...@gmail.com> wrote: >>> >>> >>>> Thanks. No, I didn't have the right default route to the outside world. >>>> >>>> The problem is definitely connected with routes. Thanks for pointing me >>>> there. I have another router (x86) set up here and I took a look at the >>>> routes there and I could see what was missing. It was the route with a >>>> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >>>> modem) with a distance of 1, scope of 30 and target scope of 10. With >>>> that >>>> one static route in it populates other dynamic discovered routes and it >>>> all >>>> works. >>>> >>>> But there's a complication too and that is if I reset the RB750 and then >>>> configure it and get the routes right it works as I said above. But if I >>>> take a more complicated setup I had configured and backed up and load >>>> that >>>> and then set everything right (including the routes) it still won't >>>> work! >>>> The backup was made under 4.3 and the unit is now running 4.5. I don't >>>> know >>>> if that could be it. Anyway, it seems like I can make it work, I just >>>> have >>>> to go through all the trouble of configuring it all again. >>>> >>>> What a pain there's no way to take an x86 config and load it on an >>>> RB750. >>>> >>>> Thanks to all who replied. >>>> >>>> Greg >>>> >>>> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >>>> >>>> >>>>> Did you set the correct default route on the 750? >>>>> >>>>> Greg Ihnen wrote: >>>>> >>>>>> I have an RB750 which I'm trying to install. It's not my first. The >>>>>> >>>> modem is not acting as a DHCP server so I have to config the WAN port >>>> (Eth1 >>>> Gateway) manually. When I've configured the modem (using NAT) I can't >>>> access >>>> or ping the internet. I can ping the modem. So pings get to the modem >>>> but >>>> not ip address of servers I know on the internet. Anyone have any idea >>>> what >>>> this could be? I even downloaded a config from a working RB750 I have at >>>> another location, edited the config so it was no longer using DHCP on >>>> Eth1, >>>> manually configured Eth1, and nothing. Again I can ping the modem but >>>> nothing beyond it. >>>> >>>>>> Thanks in advance. >>>>>> >>>>>> Greg >>>>>> >>>>>> >>>>>> >>>>>> >>>> -------------------------------------------------------------------------------- >>>> >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>>>> >>>> -------------------------------------------------------------------------------- >>>> >>>>>> WISPA Wireless List: wireless@wispa.org >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>>> >>>>>> >>>>>> >>>>> -- >>>>> Scott Reed >>>>> Sr. Systems Engineer >>>>> GAB Midwest >>>>> 1-800-363-1544 x4000 >>>>> Cell: 260-273-7239 >>>>> >>>>> >>>>> >>>>> >>>>> >>>> -------------------------------------------------------------------------------- >>>> >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> >>>> -------------------------------------------------------------------------------- >>>> >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> > > -- > Scott Reed > Sr. Systems Engineer > GAB Midwest > 1-800-363-1544 x4000 > Cell: 260-273-7239 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
