Could I just export Interface,and all of IP, and all of Queue? That way it would be just three files and it would have all my config. Is there anything in the exports which is MAC address specific (specific to the x86 hardware) that won't work in the RB750?
Thanks! Greg On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote: > Greg, > > Yes there is > > /ip address export file=ipaddr86 > /ip route export file=iprout86 > > Then... > > /import file=iproute86.rsc > /import file=ipaddr86.rsc > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to continue > that counts.” > --- Winston Churchill > > > On Tue, Mar 2, 2010 at 8:50 PM, Greg Ihnen <os10ru...@gmail.com> wrote: > >> Thanks. No, I didn't have the right default route to the outside world. >> >> The problem is definitely connected with routes. Thanks for pointing me >> there. I have another router (x86) set up here and I took a look at the >> routes there and I could see what was missing. It was the route with a >> destination address of 0.0.0.0/0 and a gateway of 201.222.12.53 (the >> modem) with a distance of 1, scope of 30 and target scope of 10. With that >> one static route in it populates other dynamic discovered routes and it all >> works. >> >> But there's a complication too and that is if I reset the RB750 and then >> configure it and get the routes right it works as I said above. But if I >> take a more complicated setup I had configured and backed up and load that >> and then set everything right (including the routes) it still won't work! >> The backup was made under 4.3 and the unit is now running 4.5. I don't know >> if that could be it. Anyway, it seems like I can make it work, I just have >> to go through all the trouble of configuring it all again. >> >> What a pain there's no way to take an x86 config and load it on an RB750. >> >> Thanks to all who replied. >> >> Greg >> >> On Mar 2, 2010, at 7:22 PM, Scott Reed wrote: >> >>> Did you set the correct default route on the 750? >>> >>> Greg Ihnen wrote: >>>> I have an RB750 which I'm trying to install. It's not my first. The >> modem is not acting as a DHCP server so I have to config the WAN port (Eth1 >> Gateway) manually. When I've configured the modem (using NAT) I can't access >> or ping the internet. I can ping the modem. So pings get to the modem but >> not ip address of servers I know on the internet. Anyone have any idea what >> this could be? I even downloaded a config from a working RB750 I have at >> another location, edited the config so it was no longer using DHCP on Eth1, >> manually configured Eth1, and nothing. Again I can ping the modem but >> nothing beyond it. >>>> >>>> Thanks in advance. >>>> >>>> Greg >>>> >>>> >>>> >> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>> >>> -- >>> Scott Reed >>> Sr. Systems Engineer >>> GAB Midwest >>> 1-800-363-1544 x4000 >>> Cell: 260-273-7239 >>> >>> >>> >>> >> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
