I'd use XR5s if you can, if not use R52H. Depending on your cost you might want to use Ubnt for APs.
I have not used MT APs but enabling it a one command extra work but could save you down the road for whatever reason... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 3, 2010 at 12:33 PM, Steve Barnes <st...@pcswin.com> wrote: > I have a hotel that it takes 3 AP to cover well. I am going to use 3 MT411 > all wired back to a RB450 router for hotspot. I plan to set all the 411 to > bridged and all the same channel and SSID. Is this the best way. Is there > any reason to do WDS? > > Steve Barnes > RC-WiFi Wireless Internet Service > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/