9913 coax won't generate audible tones unless the wind is going between say
a tower member and the coax, then it could act as a reed...

9913 and LMR400, however, have been tracked down to be the cause of all
kinds of RF racket when in duplex operation...

http://www.repeater-builder.com/antenna/ant-sys-index.html



On Sat, Apr 3, 2010 at 10:17 AM, Mike <m...@aweiowa.com> wrote:

> You are correct; it's either a Diamond or Comet.  I think it's a vomit.  I
> took some binoculars out and gazed at the top; the cap is still attached.
> The "wispiness" of the stick is the reason I "lassoed" the top.  It really
> is a thin walled radome.  For what it's worth, it is connected to a UHF
> repeater in my office at the base of the tower and has *phenomenal*
> coverage
> WITHOUT preamplification.  The 9913 coax(NOS) I used wouldn't generate
> those
> tones would it?
>
> Friendly Regards,
>
> Mike Gilchrist
> Disruptive Technologist
> Advanced Wireless Express
> P.O. Box 255
> Toledo, IA   52342
> 239.770.6203
> m...@aweiowa.com
>
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of AJ
> Sent: Saturday, April 03, 2010 10:51 AM
> To: WISPA General List
> Subject: Re: [WISPA] Pan flutes on the tower
>
> Comet, Diamond and a number of off shore companies
> (Workman/Opek/Tram/Browning/Jetstream) all make a variant of this antenna -
> the most common failure we've had is wind on top mounts snapping them in
> half... If you looked at the inside prior to it being sealed up, it's
> nothing more than a very thin wall fiberglass tube with some brass rod
> hovering in the middle, supsended by nothing more than packing peanuts :)
>
> Another item - couldn't quite tell from the picture - the top metal cap on
> the antenna has been known to blow off (held on with a dab of wood glue, no
> wonder)... This might also cause some issues...
>
>
>
>
>
> --------------------------------------------------------------------------------
>  WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to