And a reset button! :) On Thu, May 6, 2010 at 12:13 AM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > Why use Tranzeo when there is Ubnt. > > Better price, looks, interface, hardware, works better (IME). > > On 5/5/10, Kurt Fankhauser <k...@wavelinc.com> wrote: >> Tranzeo needs to step up their game, I mean, look how many manufacturers >> have Mimo-N radio's out now. Look how long it took Tranzeo to add 802.11G to >> the CPQ line. Then 10mhz channels on top of that. >> >> Kurt Fankhauser >> WAVELINC >> P.O. Box 126 >> Bucyrus, OH 44820 >> 419-562-6405 >> www.wavelinc.com >> >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Marlon K. Schafer >> Sent: Wednesday, May 05, 2010 11:40 AM >> To: WISPA General List >> Subject: Re: [WISPA] Tranzeo - Again..... >> >> I have yet to find a Tranzeo AP that works. >> >> Pull it out and put nearly anything else in it's place. >> >> I use MT for ap's and have not looked back. How many Tranzeo ap's would you >> >> like? I've got stacks of them on the shelf (I use them for REALLY small >> repeater sites). >> marlon >> >> ----- Original Message ----- >> From: "Kosinet Wireless" <wirel...@kosinet.com> >> To: "WISPA General List" <wireless@wispa.org> >> Sent: Monday, May 03, 2010 1:49 PM >> Subject: [WISPA] Tranzeo - Again..... >> >> >>> Hey all, >>> >>> I've got what appears to me to be a dumb question, but I'm all out of good >>> answers right now..... >>> >>> We've got mostly all Alvarion stuff on our WISP Network - All bridged, >>> including the backhauls. The entire network is addressed @ 10.0.100.x for >>> management / monitoring purposes, and has been running fine. (Our Public >>> IP >>> address space is 98.100.x.x) >>> >>> We recently added a Tranzeo AP, and (1) client at a new POP - Addressed >>> them >>> into our 10.0.100.x Network and set the client up. Signal is great, but >>> we've had nothing but problems at this location. It will run for a short >>> while, then drop off, then come back, etc. (And on, and on......) While >>> testing we discovered we can ping the 10.0.100.x address, and / or stay >>> logged onto the radio consistently, but the Router on the Public IP drops >>> off. We've swapped Radios / Routers / Switches / Etc. - The only constant >>> is >>> the Tranzeo link. (The Client at the POP that we're broadcasting from work >>> flawlessly - It's a Ubiquity Bridge Link.) There's the scenario, here's >>> the >>> question. >>> >>> Is there a problem with me addressing the Tranzeo Radios in the >>> 10.0.100.x????? Arp Table problems? >>> >>> -Gary- >>> >>> >>> >>> >> ---------------------------------------------------------------------------- >> ---- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >> ---------------------------------------------------------------------------- >> ---- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -- > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > “Success is not final, failure is not fatal: it is the courage to > continue that counts.” > --- Winston Churchill > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
