Steve,

After several firmware updates and configurations, I finally have the "warm
& fuzzies" about my RocketM5 sectors. These 4 sectors are on my main tower
and are backhauls for my whole network!  I have not had time to work with my
2.4 sectors since the last go around was a flop. After upgrading all clients
on one AP over to M radios, I turned on Airmax and things feel much better.
YMMV.

On Mon, Sep 13, 2010 at 1:31 PM, Steve Barnes <st...@pcswin.com> wrote:

> All my APs are Mikrotik. My CPE’s are a mix of Tranzeo and UBNT.   I have a
> AP with 58 Clients on it and starting to get complaints about slowdowns.
> They are all setup 10 MHz channel 802.11g.  This is a tower that due to
> contractual issues I cannot add anymore equipment.  So I am considering
> taking down the Mikrotik and 120 degree sector and putting up a UBNT Rocket
> and Airmax 120 sector.  It will take time to physically switch all my
> clients to new UBNT Airmax equipment but would like to get it done before
> the snow flies.
>
>
>
> Has anyone down this?  Success?  I know I cannot turn on Airmax till
> everyone is on the UBNT with that capability but does it work fine till you
> get it on?
>
>
>
> *Steve Barnes*
>
> RC-WiFi Wireless Internet Service <http://www.rcwifi.com/>
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to