So... we're most of the way through a mid-span design similar to what people
are outlining here. Right now it's only non-standard POE, though. No 802.3.
Again, we were only going to build three, for our own use. If we sold something
that was:
Remote on/off per port
Auto-ping reboot per port
Dual-power supply, with notification on fail
DC powered, either 12, 24, or 48v
The one we are working on is 24v output only
1u rackmount or small form factor wall mountable
SNMP for reboot, voltage monitoring, input monitoring
We figured if it's a DC device, we can plug it into 110v easily with a
transformer.
If it was $450, would anyone buy them? Actually, what I really need to know is,
would we be able to get rid of 90 of them? We'd have to make a batch of 100,
and we could use 10. We'd get them back from the PCB manufacturer mid-May.
Kevin
----- Original Message -----
From: Mark Nash
To: WISPA General List
Sent: Monday, February 28, 2011 8:53 AM
Subject: Re: [WISPA] non-802.3 rackmount poe switch
I may be off here from the majority, but I don't want a switch. I want to be
able to put these onto router ports as well as switch ports.
I just want a rackmount multiport passive PoE controller, manageable per port
with autoping and redundant power supplies. Is that so much to ask for??? ;)
On 2/25/2011 9:42 PM, Brad Belton wrote:
Once they add remote management, redundant power supplies and a "Auto-Ping"
feature they'll have a winner.
Best,
Brad
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jerry Richardson
Sent: Friday, February 25, 2011 11:29 PM
To: WISPA General List
Subject: Re: [WISPA] non-802.3 rackmount poe switch
Just put in a 12 port 24V version of this for a UniFi WLAN. Worked
flawlessly.
Powered the UBNT PB5 on one of the ports too.
- Jerry
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Nick
Sent: Friday, February 25, 2011 8:45 PM
To: wireless@wispa.org
Subject: Re: [WISPA] non-802.3 rackmount poe switch
http://www.streakwave.com/Itemdesc.asp?ic=TP-NCMS312-18&eq=&Tp=
On 2/25/2011 5:52 PM, Jason Bailey wrote:
Anyone have a good vendor for a rackmount poe switch for ubnt
gear?Getting kinda messy with all the zip-ties and double-sided tape ;)
Thanks! Jason
--------------------------------------------------------------------------------WISPA
Wants You! Join
today!http://signup.wispa.org/--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
----------------------------------------------------------------------------
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3468 - Release Date: 02/25/11
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
------------------------------------------------------------------------------
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
