What about making a simple chassis for Ubnt POEs? On Mar 2, 2011 10:39 PM, "Brad Belton" <b...@belwave.com> wrote: > Hello Kevin, > > > > I'd be interested depending on how many ports you think this device would > have. It seems 12 ports would be a good compromise. If a HUB site requires > more than 12 ports then that site should easily justify another $450 in > equipment, IMO. > > > > Would surge suppression be included similar to whatever basic surge > suppression is found in today's PoE's? > > > > 24VDC output would probably be our preference too. Are you saying the DC > input would be adjustable or are you looking for a consensus? > > > > 1U shallow depth rack mount is pretty much a requirement for us. > > > > Keep us posted. > > > > Best, > > > > > > Brad > > > > > > > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Kevin Sullivan > Sent: Wednesday, March 02, 2011 5:24 PM > To: WISPA General List > Subject: Re: [WISPA] non-802.3 rackmount poe switch > > > > So... we're most of the way through a mid-span design similar to what people > are outlining here. Right now it's only non-standard POE, though. No 802.3. > Again, we were only going to build three, for our own use. If we sold > something that was: > > > > Remote on/off per port > > Auto-ping reboot per port > > Dual-power supply, with notification on fail > > DC powered, either 12, 24, or 48v > > The one we are working on is 24v output only > > 1u rackmount or small form factor wall mountable > > SNMP for reboot, voltage monitoring, input monitoring > > > > We figured if it's a DC device, we can plug it into 110v easily with a > transformer. > > > > If it was $450, would anyone buy them? Actually, what I really need to know > is, would we be able to get rid of 90 of them? We'd have to make a batch of > 100, and we could use 10. We'd get them back from the PCB manufacturer > mid-May. > > > > Kevin > > ----- Original Message ----- > > From: Mark Nash <mailto:markl...@uwol.net> > > To: WISPA General List <mailto:wireless@wispa.org> > > Sent: Monday, February 28, 2011 8:53 AM > > Subject: Re: [WISPA] non-802.3 rackmount poe switch > > > > I may be off here from the majority, but I don't want a switch. I want to > be able to put these onto router ports as well as switch ports. > > I just want a rackmount multiport passive PoE controller, manageable per > port with autoping and redundant power supplies. Is that so much to ask > for??? ;) > > On 2/25/2011 9:42 PM, Brad Belton wrote: > > Once they add remote management, redundant power supplies and a "Auto-Ping" > feature they'll have a winner. > > Best, > > Brad > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Jerry Richardson > Sent: Friday, February 25, 2011 11:29 PM > To: WISPA General List > Subject: Re: [WISPA] non-802.3 rackmount poe switch > > Just put in a 12 port 24V version of this for a UniFi WLAN. Worked > flawlessly. > > Powered the UBNT PB5 on one of the ports too. > > - Jerry > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Nick > Sent: Friday, February 25, 2011 8:45 PM > To: wireless@wispa.org > Subject: Re: [WISPA] non-802.3 rackmount poe switch > > http://www.streakwave.com/Itemdesc.asp?ic=TP-NCMS312-18 > <http://www.streakwave.com/Itemdesc.asp?ic=TP-NCMS312-18&eq=&Tp=> &eq=&Tp= > > > On 2/25/2011 5:52 PM, Jason Bailey wrote: > > > Anyone have a good vendor for a rackmount poe switch for ubnt gear?Getting > kinda messy with all the zip-ties and double-sided tape ;) Thanks! Jason > > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > _____ > > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1204 / Virus Database: 1435/3468 - Release Date: 02/25/11 > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > _____ > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
