We haven't seen those issues, rmas are provided without much questions asked..., never had an issue with PS either, got them on un vented enclosures
Gino A. Villarini g...@aeronetpr.com<mailto:g...@aeronetpr.com> Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Bob Moldashel Sent: Tuesday, September 27, 2011 7:55 PM To: WISPA General List Subject: Re: [WISPA] LIGOWAVE PTP24-2 Honestly..... Due to repair issues with Motorola we did not even consider them in any of our testing. And now that the product line has changed hands again...... I am glad we didn't. I know alot of people have had great experience with Motorola. I was sold on the Orthogon line when it first came out and we deployed one of the early versions of their PtP links with great results. Motorola bought them out and we got the run around when it came time to get Orthogon equipment repaired. Still have 3 or 4 radios in the box that need repair. In addition, the power supplies run very hot. In a years time we probably go through 3-4 power supplies (with 11 links in service). It might work fine.....I just don't know and don't want to get stuck with something that may become obsolete or not supported... -B- On 9/27/2011 7:11 PM, Gino Villarini wrote: How the Motorola PTP units did on your tests? Sent from my Motorola Startac... On Sep 27, 2011, at 7:08 PM, "Bob Moldashel" <lakel...@gbcx.net<mailto:lakel...@gbcx.net>> wrote: We have tested several manufacturers radios on 5.4 in the metro NYC area and Exalt is the only manufacturer that has not blacklisted channels or shut down on false DFS hits related to noise. There are others but this is my preference. Exalt (EX5r) will provide 440 Mbps on a 64 MHz. channel. Simple math will provide throughput for 32/16/8 Mhz. channels. This is aggregate with 50/50, 65/35 or 80/20 data splits. Also single polarity. -B- On 9/27/2011 4:14 PM, Faisal Imtiaz wrote: What makes the Exalt Radios on 5.4 better than any other ptp radios for such application ? (doing MIMO on a 40Mhz channel will /should provide approx 90meg duplex). ?? (I guess you are suggesting to the original poster.... Have you considered using 5.4 Mimo Radios before you spend the bucks on a 24Ghz link ?) :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, Fl 33155 Tel: 305 663 5518 x 232 Helpdesk: 305 663 5518 option 2 Email: supp...@snappydsl.net<mailto:supp...@snappydsl.net> On 9/27/2011 3:48 PM, Mathew Howard wrote: Umm... no, not 100mbps fdx, but I would think you should be able to get pretty close to 100mbps aggregate. From: wireless-boun...@wispa.org<mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org] On Behalf Of Gino Villarini Sent: Tuesday, September 27, 2011 2:19 PM To: WISPA General List Subject: Re: [WISPA] LIGOWAVE PTP24-2 For 100 mbps fdx? Gino A. Villarini g...@aeronetpr.com<mailto:g...@aeronetpr.com> Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org<mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org] On Behalf Of Mathew Howard Sent: Tuesday, September 27, 2011 3:10 PM To: 'WISPA General List' Subject: Re: [WISPA] LIGOWAVE PTP24-2 3.65ghz could be an option as well. From: wireless-boun...@wispa.org<mailto:wireless-boun...@wispa.org> [mailto:wireless-boun...@wispa.org] On Behalf Of Me Sent: Tuesday, September 27, 2011 1:57 PM To: wireless@wispa.org<mailto:wireless@wispa.org> Subject: Re: [WISPA] LIGOWAVE PTP24-2 5.4 GHz has to be open. Use an Exalt link on 5:4 and you can get up to 440 aggregate with an 80/20 traffic split. Much cheaper than a Ligowave W4 Ghz Connected by DROID on Verizon Wireless -----Original message----- From: Nick W <<mailto:lists-wi...@atomsplash.com>lists-wi...@atomsplash.com<mailto:lists-wi...@atomsplash.com>> To: WISPA General List <<mailto:wireless@wispa.org>wireless@wispa.org<mailto:wireless@wispa.org>> Sent: Tue, Sep 27, 2011 18:47:55 GMT+00:00 Subject: Re: [WISPA] LIGOWAVE PTP24-2 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
