I doubt Powercode is to blame if the radios are in the accept chain (added to Powercode active/infra) but that's been my experience since 2008.
Did you look at iptables-save? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 19, 2011 5:45 PM, "Patrick D. Nix, Jr" <pni...@cnetworksolutions.com> wrote: > Ok, after talking to imagestream, they say they have gotten this same > question now twice within a week, it seems to be related to the complex nat > table rules that powercode executes. So I will revise my question, has > anyone gotten aircontrol to work successfully with powercode using iptables > in advanced scripts? If so how? > > Many thanks, > > Patrick Nix, Jr., > Computer Network Solutions > CSWEB.NET Internet Services > IT Manager > http://www.cnetworksolutions.com > http://www.csweb.net > (918) 235-0414 > > > Attention: This e-mail and any attachments may contain confidential and > privileged information. If you are not the intended recipient, please notify > the sender immediately by return e-mail, delete this e-mail and destroy any > copies. Any dissemination or use of this information by a person other than > the intended recipient is unauthorized and may be illegal. > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Josh Luthman > Sent: Wednesday, October 19, 2011 4:17 PM > To: WISPA General List > Subject: Re: [WISPA] Aircontrol for UBNT > > If it times out you have a firewall in between. Or since you are > NAT'ing you need to dst-nat the port to your server. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Oct 19, 2011 at 5:13 PM, Patrick D. Nix, Jr > <pni...@cnetworksolutions.com> wrote: > > I ssh'd into a radio and tried the command: telnet <ip of AC> 9080 > > > > Nothing. > > > > Is that the proper command? > > > > > > -----Original Message----- > > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > > Behalf Of Kristian Hoffmann > > Sent: Wednesday, October 19, 2011 11:40 AM > > To: wireless@wispa.org > > Subject: Re: [WISPA] Aircontrol for UBNT > > > > On 10/19/2011 09:17 AM, Ryan Spott wrote: > >> Admin Tab -> System Settings -> Air Control Server Address > >> Make sure this is an IP address. If not then your CPE will fail to > > talk > >> to your server. It obviously needs to be the wan port of your router. > > > > Just as a quick test, you can ssh to a managed Ubnt device, and run the > > following... > > > > telnet <Air Control Server Address> 9080 > > GET /<enter> > > <enter> > > > > If you see a HTTP header response, then you're good. If you get a blank > > > > stare, then you have a firewall problem, such as what Ryan alluded to. > > > > > > -- > > Kristian Hoffmann > > System Administrator > > kh...@fire2wire.com > > http://www.fire2wire.com > > > > Office - 209-543-1800 | Fax - 209-545-1469 | Toll Free - 800-905-FIRE > > > > > > > > ------------------------------------------------------------------------ > > -------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > ------------------------------------------------------------------------ > > -------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/