+1 Here in the Amazon I've had plastic cased radios and their associated router on the other end get taken out by nearby lightning strikes when the mast the radio was on was attached to a large non-grounded metal roof on top of a wooden frame. The fix was to mount the radios on grounded poles (the poles go right down to the ground.). Grounding the roof might have been an option but I doubt I could have grounded it good enough.
When in these houses when a nearby strike hits we often hear a big zap when these roofs get a big induced voltage and it jumps to something on it's way to ground. There's a flash and at the same time a zap, and that's our cue to put our fingers in our ears before the BOOM. Greg On Sat, Jul 7, 2012 at 12:44 PM, Faisal Imtiaz <fai...@snappydsl.net> wrote: > Hi Chris, > > Radios enclosed in total plastic cases , don't need to be 'grounded'. > > Having said that.. you should consider grounding the Mast that it is > mounted on. > > And additionally, you should consider using Ethernet cable that has a > drain wire, shielded cable, shielded connectors , and make sure that the > powersupply (POE) you are using is grounded. > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, Fl 33155 > Tel: 305 663 5518 x 232 > Helpdesk: 305 663 5518 option 2 Email: supp...@snappydsl.net > > On 7/7/2012 11:48 AM, Chris Stradtman wrote: > > Hi all, > > I've never used an Omnitik before for roof work. We're trying out the > Omnitik + SXT combo in a location for roof to roof shots. > I've figured out the grounding point for the SXT, however I can't seem to > find a corresponding manual with that information for > the Omnitik. Is it possible to ground the Omnitik locally or do we have > to do the shielded cat5 thing. I'm also used to doing lightning suppression > between the antenna and the AP, obviously this isn't possible with an > integrated antenna setup. Any additional pointers about lighting > suppression on these things?? > > Thanks, > > Chris Stradtman > > > > _______________________________________________ > Wireless mailing > listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless > > > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless