The height is based on the average client antenna height on the coverage map. If I understand what you want to do correctly. Go to an individual map not the multi map. Click the location you want to check. Click path analysis, save the link and site. Then open/edit the link to adjust the height up until you get the signal you're looking for.
jim From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday, April 09, 2014 2:08 PM To: WISPA General List Subject: [WISPA] Who is using Towercoverage.com ? I'm having a hard time adjusting to this from Radio Mobile. There's all the same "stupid" interface shortfalls, for example wanting to know what a customer's CPE would be without adding a site and putting them in the same list. I feel with technology as it is, it shouldn't be so convoluted to simply put a dot on a map and see what the signal would be from a tower while being able to adjust the elevation on the fly. I'm wondering if there's another list/forum for this service, too. There's no way I'm going write a bible of questions for support, it doesn't make a whole lot of sense for either of us. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless