One end is brick (the end that is having issues) and the other end is off a Netonix.
On Mon, Jun 20, 2016 at 9:37 PM, Chris Ruschmann <ch...@scsalaska.net> wrote: > How are you powering them? Power brick or switch? > On Jun 20, 2016 7:35 PM, "Faisal Imtiaz" <fai...@snappytelecom.net> wrote: > > Are there the only two radios you have ? maybe there is a physical > hardware issue with one of the radios.. > > we have seen something similar with on another link we were working on for > another WISP. No conclusions yet, but one radio is definitely doing hokey > stuff...They have spares, will be trying another pair (the radios linked up > on the bench, but would not link nor go thru the alignment process on a > 400m link). > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > ------------------------------ > > *From: *"Chadwick Wachs" <c...@auwireless.net> > *To: *"WISPA General List" <wireless@wispa.org> > *Sent: *Monday, June 20, 2016 12:47:43 PM > *Subject: *Re: [WISPA] Any IgniteNet MetroLinq customers out there > > Update to all on this. We are running MCS1, the latest public firmware > and contacted Ignite support. They are responsive. We did get the 60 GHz > radios to link up once - for about 30 minutes. Then, the 60 GHz radio on > the client end died. Can't open the 60 GHz aiming tool and the dashboard > acts like the radio is off. > We have been through a number of reboots to get the 60 GHz radio to wake > back up. No dice. Ignite is aware of the issue, acknowledges I am not the > only one who has seen this but so far no solutions. Last night, the 5 GHz > link between these two radios died at 3am (not a production link). We lost > all wireless and ethernet access to the client radio until a reboot. > > After rebooting, the 5 GHz would not pass any traffic until the 60 GHz > radios were turned off in the interface on both ends. Both ends are on big > UPSs so I don't think power is the issue, I think there is buggy firmware. > While I have *some* time to deal with testing firmware and trouble > shooting, I don't have unlimited time to do this. > > It is back running on 5 GHz. It is aimed well - we did get a solid 60 GHz > signal but we never got the 60's to link back up after one mysteriously > stopped. > > > > On Sun, Jun 19, 2016 at 12:37 AM, Rob Genovesi <r...@corp.coastside.net> > wrote: > >> Aiming takes patience, the scopes aren't perfect but a huge help. We >> found that turning off auto MCS and using fixed lower rate helped a >> lot. Make sure you have the newest firmware, I believe there are more >> updates coming out soon as well. IgniteNet support was responsive and >> very helpful when we had questions. >> >> >> Rob Genovesi • Coastside.Net • Owner >> 650-712-5900 • 525B Obispo Rd • Half Moon Bay CA >> >> On Wed, Jun 15, 2016 at 4:55 PM, Chadwick Wachs <c...@auwireless.net> >> wrote: >> > I have been trying for a couple days to get a new PTP60-35 60 GHz link >> up >> > and running with no luck. Looking for some help / suggestions from >> anyone >> > who has been successful getting links up. The 5 GHz link is working but >> 60 >> > never trains up. I bought the spotting scopes and each end is dead >> center. >> > Good old fashioned up/down/left/right aiming methods do not seem to work >> > either and IgniteNet is lacking in the support department. >> > >> > Anyone want to contact me off list if you have any suggestions on what >> > worked for you? >> > >> > Thanks, >> > Chad >> > >> > _______________________________________________ >> > Wireless mailing list >> > Wireless@wispa.org >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> > > > > -- > > ____________________________ > > AU Wireless (Golden Wireless) > > www.AUwireless.net <http://www.auwireless.net/> > > Facebook <https://www.facebook.com/AU-Wireless-1630781100539377/> | > @auwirelessnet <https://twitter.com/AUWirelessNet> > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > -- ____________________________ AU Wireless (Golden Wireless) www.AUwireless.net <http://www.auwireless.net/> *Facebook <https://www.facebook.com/AU-Wireless-1630781100539377/>* | @auwirelessnet <https://twitter.com/AUWirelessNet>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
