We use UBNT Carrier. We have attached it to 1/8 cable for support. You do have to be careful not to tear the outer shield, as otherwise you will have water go into the cabinet.
We now do not use cat5 on commercial towers, and have opted to a power cable with fiber. Why run 10-12 strands of cat5 when one strand of fiber does the job, with ESD? On Wed, Jan 18, 2017 at 2:25 PM, Chris Fabien <ch...@lakenetmi.com> wrote: > We are doing a deployment on a 90ft steel monopole where our cable will > hang inside the pole. It seems like we should be using a better grade of > cable than the Primus shielded cat5 we usually use for towers where it is > taped to the leg. Any suggestions? > > Thanks > Chris Fabien > LakeNet LLC > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > -- -- Clay Stewart, COO/CTO SCS Broadband A Division of Acelanet, LLC 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless