Most of the good quality outdoor Ethernet cables have a 'strength tape' in the middle... UBNT Carrier has a nice piece of plastic in the middle... Shireen cable has a nice fiber tape .. etc etc.
If you can tie these cables at the top securely, then there should be no issue is letting it dangle in the center of the monopole. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Chris Fabien" <[email protected]> > To: "WISPA General List" <[email protected]> > Sent: Wednesday, January 18, 2017 2:39:09 PM > Subject: Re: [WISPA] Best cat5 for a monopole > Tips on what connectors to use? That looks like a very thick cable. Also how > to > hang it at the top? > On Wed, Jan 18, 2017 at 2:31 PM, TJ Trout < [email protected] > wrote: >> bbdge or bbdg6 >> On Wed, Jan 18, 2017 at 11:25 AM, Chris Fabien < [email protected] > wrote: >>> We are doing a deployment on a 90ft steel monopole where our cable will hang >>> inside the pole. It seems like we should be using a better grade of cable >>> than >>> the Primus shielded cat5 we usually use for towers where it is taped to the >>> leg. Any suggestions? >>> Thanks >>> Chris Fabien >>> LakeNet LLC >>> _______________________________________________ >>> Wireless mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/wireless >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
