That's what I figure...it's just that little blue line doesn't exactly jump out and slap you in the face... I could stand a warning box when you're close to the cutoff. Just a friendly "Be aware you are close to the JT9 cutoff frequency".
Mike W9MDB -----Original Message----- From: Bill Somerville [mailto:g4...@classdesign.com] Sent: Friday, October 17, 2014 5:52 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] JT9 freq range On 17/10/2014 23:48, Joe Taylor wrote: > Mike -- > > On 10/13/2014 5:50 PM, Michael Black wrote: >> I just made a boo-boo which I think could have been prevented. >> >> I had the JT9 frequency range set to "JT65 2600 JT9". I had my >> offset set to 2600 also. I couldn't decode anything. >> >> So perhaps WSJT-X shouldn't let you transmit JT9 at or near the >> cutoff frequency? Perhaps at least 10Hz above it? > I can't figure out what this was about. > > I tried to reproduce what you describe. I set the blue dividing line > to > "JT65 2600 JT9", and the Tx and Rx frequencies both to 2600. Received > signals in both modes continue to decode as usual. > > If you think there is a bug, or some undesirable behavior, could you > please provide a recipe for reproducing the problem? I think Mike means that a QSO partner who drifts down a few Hz could fall below the separator when working very close to it. Personally I move the separator down a click if someone calls down there. > > -- Joe, K1JT 73 Bill G4WJS. ---------------------------------------------------------------------------- -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
