Hi All, I have added a change to make working frequencies mode dependent. The first thing you will notice is that your working frequencies will have disappeared, this is because the format of the frequencies table has changed. To restore the frequencies go to Settings->Frequencies and click the new "Reset" button, this will reset the working frequencies to default values.
The default frequencies are defined in FrequencyList.cpp, they are a work in progress and will almost certainly need adjusting before release. Ferquencies can either have a specific mode value from the FrequencyList::Modes enumeration or the NULL_MODE value. If a frequency is designated as NULL_MODE it will appear whatever mode is chosen. I have removed the +2 kHz check box since changing to JT9 will select the JT9 frequencies and QSY to the one on the current band if there is one. Going to another mode will QSY to that mode's working frequency if there is one for the current band. This is all WIP so expect a few glitches but I thought that the functionality improvements my be worth a little pain with defects from early exposure. As always comments, suggestions and testing is welcome. 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
