Hi Bill, Thanks for your reply.
One thing I forgot was that the message when receiving says "Receiving 1". ----- Original Message ----- From: "Bill Somerville" <g4...@classdesign.com> To: wsjt-devel@lists.sourceforge.net Date: Thu, 04 Jun 2015 15:39 +0700 Subject: Re: [wsjt-devel] Feedback on WSPR in WSJT-X > On 04/06/2015 04:54, Victor Batchelor wrote: > > Hi Guys, > Hi Victor, > > > > My comments are :- > > > > 1. The software often sends twice in succession. I have TX Pct set to 20% > > and band hopping off > There are plans to use an adjusted transmission schedule that is not > truly random so that consecutive Tx periods are controlled. > > > > 2. TX message appears in RX window even though selected off in settings > > ------------------------ Transmiting WSPR-2 ----------------------- 20m > The setting refers to outgoing QSO messages in other modes, perhaps we > should consider withholding the WSPR tx notifications as well based on > that setting. While we are testing the Tx notifications are useful. > > > > 3. I much prefer the old frequency scale showing 100 to 300 instead of 1400 > > to 1600 > I assume you are referring to the waterfall frequency scale, I wonder if > changing the waterfall parameters automatically when in WSPR mode might > be a good idea? The 1400 to 1600 scale represents the nominal 1500 Hz > "BFO" frequency for WSPR and gives an accurate on air frequency when > added to the dial frequency. Yes I am referring to the waterfall frequency scale. Selecting automatically would be fine or as in r3058 add a button on the waterfall screen so either scale could be selected to suit the users preference. r 3058 also showed the actual TX frequency on the receive screen which was very useful > > > > 4. The decode is much better on stations that drift > > > > 5 What does TX-Enabled-Disarmed do? > This status information is related to QSO modes like JT65/JT9/JT4 and > can have the value "Tx Enable Armed" which indicates that double > clicking on a received decode will automatically switch on automatic > transmission mode. It has no meaning in WSPR mode. > > > > Overall it is a great step forward. Thank you all for you hard wok > > > > 73 > > > > Victor > > 73 > > Bill > G4WJS. > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel 73 Victor > > ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
