Hi Bill, Here's the crude times, just eyeballing the system clock. Bare in mind, this particular box is an old / slow 2.4 Ghz Quad Core clocked up to 3.0 Ghz.
Start: 11:39 End Configure & Build: 11:41 ET: ~2m Start Fixup: 11:41 End Fixup: 11:49 ET: ~8m Start Verify: 11:49 End Verify: 11:54 ET: ~5m Total ET: 11:39 to 11:54 ( == SLOW!! ~15 Minutes ) The same box, on Linux, takes roughly 1.0 to 1.5 minutes or less. 73's Greg, KI7MT On 7/28/2015 11:00 AM, Bill Somerville wrote: > On 28/07/2015 17:49, KI7MT wrote: >> Hi Bill, > Hi Greg, >> I finished a run of several thousand saved wave files on Windows, there >> were no additional issues to speak of. I've not done allot of live >> testing yet. > Thanks for running that. Related to this, I am intrigued to know how you > are managing to build an install target for a Release configuration > build on Windows. If you have dumpbin.exe installed it should not be > working and if you don't have it installed your install fixup must be > taking many minutes because of the problem I am currently discussing > with the CMake developers. >> What would you suggest for testing Qt5.5 on *Nix for distros that do not >> have a package available, the OpenSource Installer and ToolChain file >> maybe ? > As it is just a simple library location with good CMake support, simply > adding the Qt root to the CMAKE_PREFIX_PATH should be enough to build. > For running you will probably have to use LD_LIBRARY_PATH to locate the > Qt components. > > TBH I wouldn't worry too much as Qt 5.5 is not a major upgrade from 5.2 > so I don't expect any serious problems. >> 73's >> Greg, KI7MT > 73 > Bill > G4WJS. >> On 07/27/2015 01:28 PM, Eric NO3M wrote: >>> Bill >>> >>> v 1.6.0-devel r5727 compiles fine w/ Qt 5.5 here. Thanks for also >>> addressing the RX signal meter rendering issue. >>> >>> 73 Eric NO3M / WG2XJM >>> >>> On 07/27/2015 02:16 PM, Bill Somerville wrote: >>>> Hi All, >>>> >>>> I have updated the sources to work with Qt v5.5. The changes were >>>> trivial but I would appreciate any reports of other issues from anyone >>>> building with Qt 5.5 on any platform. >>>> >>>> I will start working through my production VMs upgrading to Qt 5.5 but >>>> that will take a while. >>>> >>>> 73 >>>> Bill >>>> G4WJS. > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
