On 26/11/2017 17:31, carc...@gmail.com wrote:
OM,
please read the ReadMe.txt file at the root directory of the
installer DMG, it contains important instructions needed to
prepare you Mac for use with WSJT-X.
Thanks, Bill, that allowed me to configure things, but with the Yaesu
FT-857 default configuration the software claims that the rig's
frequency can't be read.
(WSJT-X chose the Bluetooth device on its own.) CAT control is
automatically set to VOX, com settings automatically set 4800,8,2
Thanks!
Hi OM,
you must match the "Preferences->Radio" serial port settings to those of
your rig. If the rig is set to 4800 baud then you set that in WSJT-X and
so on. 8-bit 2 stop bits is correct for your rig. Also make sure that
CAT port is set to CAT rather than external ATU control in the rig's
menu. The Rigblaster Blue seems to have some sort of internal VOX but I
would recommend selecting CAT for "Preferences->Radio->PTT Method" as it
avoids issues with timing on these rigs.
Are you able to select the required 48000 Hz sample rate for the audio
interface using Audio MIDI Settings as described in the WSJT-X
ReadMe.txt file?
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
