Hi Alex,
These sound like good ideas to me. A mechanism for sending I/Q data
into WSJT-X has been on our back-burner "To Do" list for some time. But
as you can probably guess, I'm only superficially familiar with the
protocols you're considering. Bill will probably have a more useful
response for you.
-- Joe, K1JT
On 3/28/2018 10:34 AM, Alex, VE3NEA wrote:
Hello developers,
I am looking into supporting the RTP+RTCP protocol in CW Skimmer, and I
want to do this in a way compatible with other software, including
WSJTX. RTP seems to be the best way of exchanging the I/Q data between
the programs, but it needs to be complemented with another protocol for
reading and setting the radio's parameters. I was thinking about using
NDJSON over TCP for that (https://github.com/ndjson/ndjson-spec), the
solution that worked well in my GRITTY project
(http://dxatlas.com/Gritty/). However, Hubert, HB9JND has drawn my
attention to the new TCI protocol (https://github.com/maksimus1210/TCI)
that seems to have all required radio control commands, but sends I/Q
data via TCP. Do you think it would make sense to combine RTP+RTCP (for
data) with TCI (for commands)? Would you be interested in supporting
this combination in WSJTX? Are there any good alternatives to this
solution?
73 Alex VE3NEA
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
