Hi Saku,
I think we may call it a bug.
In r8665 I've made Ctrl+F11 and Ctrl+F12 change the Tx freq only when
equal to Rx Freq, and the list of Keyboard Shortcuts has been changed
accordingly. These keyboard commands override the setting of "Hold TX
freq", which seems OK to me.
--Joe, K1JT
On 5/18/2018 10:47 AM, Saku wrote:
Hi !
Wsjt-x 1.9.0-rc4 r8662
TX =461Hz (not specific, any split QRG will do)
Hold TX freq = checked
Auto Seq = any
Call 1st = any
RX = 2296Hz (not specific, any split QRG will do)
Settings/general/Allow frequency changes while transmitting = checked
Settings/Radio/Split operation = rig
Rig = IC706
While transmitting, or receiving, pressing either Ctrl+F12 or Ctrl+F11
will change RX 1Hz as expected.
TX changes to same frequency as RX . From 641 to 2295 (or 2297)
depending on F11 or F12 key.
Expected:
-TX not moving at all as Hold TX freq = checked
-TX moving +-1Hz from current value as in description of
Help/Keyboard shortcuts
Not expected to jump to RX frequency.
(same happens in official released 1.9.0rc4 rpm for Fedora28, so don't
say r8662 should not be used ... etc)
Bug or feature?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
