Uwe,
the pre-2.0 log DOES NOT contain six character grids, other than your
own. I'm looking at my log for the past year, and the logged station
only shows the 4 character grid since that's the only thing sent in the
standard exchange.
Its not a bug, its a lack of DATA. You cannot match a six character
grid like FN00ea to the four character grid of FN00, as there are two
many grids that fall under the FN00 area.
Neil, KN3ILZ
On 9/26/2018 9:19 AM, DG2YCB, Uwe wrote:
For confirmation: Just created an wsjt_log.adi file from my standard
logbook where all grid squares are in 4-digit format. Result: WSJT-X
2.0.0-rc2 now recognizes all stations worked before as well as new
grids, new grids on band, new calls, new calls on band and so on as it
should.
Conclusion: There really must be a bug, that 6-digit grids are not
correctly recognized by WSJT-X 2.0.
Really hope that this can be fixed.
73 de Uwe DG2YCB
*Von:*DG2YCB, Uwe [mailto:[email protected]]
*Gesendet:* Dienstag, 25. September 2018 13:07
*An:* 'WSJT software development'
*Betreff:* [wsjt-devel] Bug: WSJT-X 2.0 only recognizes 4-digit grid
squares but not 6-digit grid squares
Meanwhile I made some more tests. It is indeed the case that WSJT-X
2.0.0-rc1 recognizes from the file wsjt_log.adi only 4-digit grid
squares, but NOT 6-DIGIT GRID SQUARES! Please be so kind as to fix
this bug asap.
When I change in the wsjt_log.adi file generated from my standard
logbook manually the an entry like <GRIDSQUARE:6>KM46ck to
<GRIDSQUARE:4>KM46 then the station is correctly shown as worked B4.
For the GRIDSQUARE:6 entry it is always shown as “New Grid”. This is
the reason why I have so many New Grid false positives.
73 de Uwe, DG2YCB
*Von:*DG2YCB, Uwe [mailto:[email protected]]
*Gesendet:* Montag, 24. September 2018 08:59
*An:* [email protected]
*Betreff:* [wsjt-devel] New Grid false positives
Hi,
Using WSJT-X v2.0.0-rc1 I am still having lots false positives
regarding New Grids. As there was no helpful answer to my previous
post so far, and assuming that WSJT-X is taking information about
worked callsigns, grids, et cetera from the file wsjt_log.adi, just
made the following test: Created a new wsjt_log.adi with all QSO
entries from my standard logbook and saved into AppData/local/WSJT-X
directory. Result: WSJT-X 1.9.1 works with it without any mistake
regarding recognition of B4 stations, but WSJT-X 2.0.0-rc1 now SHOWS
EVERY STATION AS A NEW GRID. Same file in the same directory. Checked
as examples SV5DKL, VP8LP and ER1PB. They are in my wsjt_log.adi with
following entries:
<QSO_DATE:8>20170910 <TIME_ON:6>085300 <CALL:6>SV5DKL <BAND:3>17m
<FREQ:4>18.1 <MODE:3>FT8 <GRIDSQUARE:6>KM46ck <COUNTRY:10>Dodecanese
<NAME:19>Efstathios Maliakis <RST_SENT:1>2 <RST_RCVD:2>-8
<NOTES:6>Rhodes <TIME_OFF:6>085500 <EOR>
<QSO_DATE:8>20171230 <TIME_ON:6>090400 <CALL:5>VP8LP <BAND:3>17m
<FREQ:4>18.1 <MODE:3>FT8 <GRIDSQUARE:6>GD18bh <COUNTRY:16>Falkland
Islands <NAME:10>Bob Mcleod <RST_SENT:1>0 <RST_RCVD:3>-11
<NOTES:7>Stanley <TIME_OFF:6>090500 <EOR>
<QSO_DATE:8>20180726 <TIME_ON:6>144900 <CALL:5>ER1PB <BAND:3>12m
<FREQ:6>24.915 <MODE:3>FT8 <GRIDSQUARE:6>KN47KA <COUNTRY:7>Moldova
<NAME:17>Simanenkov Sergei <RST_SENT:2>-4 <RST_RCVD:3>-11
<NOTES:8>Chisinau <TIME_OFF:6>145100 <EOR>
“New Grids” were exactly the grids which are in the adif file (in
WSJT-X 2.0.0-rc1 of course as 4-digit grids).
Is there a bug in WSJT-X v2.0.0-rc1 recognizing 6-digit grid squares
from wsjt_log.adi file?
73 de Uwe, DG2YCB
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
