Its not a bug, its a lack of DATA. You cannot match a six character grid like FN00ea to the four character grid of FN00, as there are two many grids that fall under the FN00 area.
Neil, exactly that was working in all former versions until WSJT-X 1.9.1. It is only v2.0.0 where 6-digit grids are no longer recognized. Of course you are right, that WSJT-X so far created only 4-digit grid entries in the log file. BUT: As in the past I'd also used other software for digital modes, my WSJT-X's pre-log contains only a small portion of my QSO data. Therefore it was always a good solution for me just to create an adif file from my standard logbook. 73 de Uwe, DG2YCB Von: Neil Zampella [mailto:[email protected]] Gesendet: Mittwoch, 26. September 2018 15:51 An: [email protected] Betreff: Re: [wsjt-devel] Bug: WSJT-X 2.0 only recognizes 4-digit grid squares but not 6-digit grid squares Uwe, the pre-2.0 log DOES NOT contain six character grids, other than your own. I'm looking at my log for the past year, and the logged station only shows the 4 character grid since that's the only thing sent in the standard exchange. Its not a bug, its a lack of DATA. You cannot match a six character grid like FN00ea to the four character grid of FN00, as there are two many grids that fall under the FN00 area. Neil, KN3ILZ On 9/26/2018 9:19 AM, DG2YCB, Uwe wrote: For confirmation: Just created an wsjt_log.adi file from my standard logbook where all grid squares are in 4-digit format. Result: WSJT-X 2.0.0-rc2 now recognizes all stations worked before as well as new grids, new grids on band, new calls, new calls on band and so on as it should. Conclusion: There really must be a bug, that 6-digit grids are not correctly recognized by WSJT-X 2.0. Really hope that this can be fixed. 73 de Uwe DG2YCB Von: DG2YCB, Uwe [mailto:[email protected]] Gesendet: Dienstag, 25. September 2018 13:07 An: 'WSJT software development' Betreff: [wsjt-devel] Bug: WSJT-X 2.0 only recognizes 4-digit grid squares but not 6-digit grid squares Meanwhile I made some more tests. It is indeed the case that WSJT-X 2.0.0-rc1 recognizes from the file wsjt_log.adi only 4-digit grid squares, but NOT 6-DIGIT GRID SQUARES! Please be so kind as to fix this bug asap. When I change in the wsjt_log.adi file generated from my standard logbook manually the an entry like <GRIDSQUARE:6>KM46ck to <GRIDSQUARE:4>KM46 then the station is correctly shown as worked B4. For the GRIDSQUARE:6 entry it is always shown as "New Grid". This is the reason why I have so many New Grid false positives. 73 de Uwe, DG2YCB Von: DG2YCB, Uwe [mailto:[email protected]] Gesendet: Montag, 24. September 2018 08:59 An: [email protected] Betreff: [wsjt-devel] New Grid false positives Hi, Using WSJT-X v2.0.0-rc1 I am still having lots false positives regarding New Grids. As there was no helpful answer to my previous post so far, and assuming that WSJT-X is taking information about worked callsigns, grids, et cetera from the file wsjt_log.adi, just made the following test: Created a new wsjt_log.adi with all QSO entries from my standard logbook and saved into AppData/local/WSJT-X directory. Result: WSJT-X 1.9.1 works with it without any mistake regarding recognition of B4 stations, but WSJT-X 2.0.0-rc1 now SHOWS EVERY STATION AS A NEW GRID. Same file in the same directory. Checked as examples SV5DKL, VP8LP and ER1PB. They are in my wsjt_log.adi with following entries: <QSO_DATE:8>20170910 <TIME_ON:6>085300 <CALL:6>SV5DKL <BAND:3>17m <FREQ:4>18.1 <MODE:3>FT8 <GRIDSQUARE:6>KM46ck <COUNTRY:10>Dodecanese <NAME:19>Efstathios Maliakis <RST_SENT:1>2 <RST_RCVD:2>-8 <NOTES:6>Rhodes <TIME_OFF:6>085500 <EOR> <QSO_DATE:8>20171230 <TIME_ON:6>090400 <CALL:5>VP8LP <BAND:3>17m <FREQ:4>18.1 <MODE:3>FT8 <GRIDSQUARE:6>GD18bh <COUNTRY:16>Falkland Islands <NAME:10>Bob Mcleod <RST_SENT:1>0 <RST_RCVD:3>-11 <NOTES:7>Stanley <TIME_OFF:6>090500 <EOR> <QSO_DATE:8>20180726 <TIME_ON:6>144900 <CALL:5>ER1PB <BAND:3>12m <FREQ:6>24.915 <MODE:3>FT8 <GRIDSQUARE:6>KN47KA <COUNTRY:7>Moldova <NAME:17>Simanenkov Sergei <RST_SENT:2>-4 <RST_RCVD:3>-11 <NOTES:8>Chisinau <TIME_OFF:6>145100 <EOR> "New Grids" were exactly the grids which are in the adif file (in WSJT-X 2.0.0-rc1 of course as 4-digit grids). Is there a bug in WSJT-X v2.0.0-rc1 recognizing 6-digit grid squares from wsjt_log.adi file? 73 de Uwe, DG2YCB <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> www.avg.com
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
