This also seems to be the case with my early Yaesu FT-840 - it can receive CAT commands, but does not report anything back.
Karl Heinz - K5KHK On Mon, Oct 8, 2018 at 10:44 AM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > What version of WSJT-X are you using right now? > > Looks like we need a new rig entry for the earlier serial #'s and I can > build you one for testing. > > de Mike W9MDB > > > > > On Monday, October 8, 2018, 9:34:22 AM CDT, Shane Stroud < > shanestroud1...@hotmail.com> wrote: > > > I have discovered that the early serial numbered models of the Yaesu > FT-847 had unidirectional CAT. Basically, the software can send > frequencies and modes to the rig, but the rig cannot respond. This applies > to serial numbers through about 8GXXXX. Mine is an 8EXXXX series. > > In any version of WSJT, under any operating system, the rig will set > frequency and mode, then error out because it cannot respond to polling. > > I'm not sure if this needs fixed in WSJT or in hamlib, but other hamlib > programs seem to work with the rig without issue. > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
