Right-click Windows icon in lower leftDevice ManagerGo to each USB controller
and each device -- some but not all will have a "Power Management" tab.
Disable the "Allow the computer to turn off this device to save power" option.
Additionally, in the Power & Sleep settings you can go into the Advanced
setting and turn off "USB selective suspend".
de Mike W9MDB
On Tuesday, January 1, 2019, 9:18:27 AM CST, Richard Solomon
<w1...@outlook.com> wrote:
I don't find USB Power Options anywhere you mention.Perhaps it's a Windows 10
thing ??
Can you give me more explicit instructions ?
Tnx es HNY, Dick, W1KSZ
Sent from OutlookFrom: Bill Somerville <g4...@classdesign.com>
Sent: Tuesday, January 1, 2019 8:03 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Tune Mode Disabled On 01/01/2019 14:57, Frank
Kirschner wrote:
> I often experience the same thing. If wsjt-x runs for awhile (about an
> hour or so), it no longer transmits. Both the enable transmit button
> and the tune button have no effect. It probably has something to do
> with how the program interacts with Windows. Closing and restarting
> the program fixes it.
>
> 73, Frank,
>
> KF6E
Hi Frank,
non-responsive audio after an hour or so is a symptom of Windows
powering down USB devices to save power, make sure that you have
disabled power saving options for USB hubs in Windows Device Manager and
for USB devices in the Windows Power Plan Advanced Settings.
73 & HNY
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
